郭航 (Hang Guo)
萨本栋微米纳米科学技术研究院
郭航 (GUO HANG)
SCHOOL OF ELECTRICAL AND COMPUTER ENGINEERING
已发表成果:
WOK 论文 111 篇;中文核心 23 篇;其它论文 15 篇;专利发明 8 个;
Plasma-assisted sputter Li<sub>3</sub>PO<sub>4</sub> coating on NCM955 cathodes enhancing high-temperature cycling performances
Improved electrochemical performance of high voltage LiCoO<sub>2 </sub>with Al doping and ZrO<sub>2</sub> coating
Li4Ti5O12-TiO2 composite coating layer enabling LiNi0.8Co0.1Mn0.1O2 electrodes with superior cycling performance
TiO<sub>2</sub>-LiF composite coating for improving NCM622 cathode cycling stability: one-step construction
Mechanical stimulation on a microfluidic device to highly enhance small extracellular vesicle secretion of mesenchymal stem cells
High-performance Ti-doped ZnS thin film anode for lithium-ion batteries
Facile fabrication of freestanding graphene nanoplatelets composite electrodes for multi battery storage
Two-dimensional ZnS@N-doped carbon nanoplates for complete lithium ion batteries
Numerical Study and Performance Analyses of Mems-Based Particle Velocity Sensor with Combined Inclined Rib Pair
Metaphosphate-Bridged Interface Boosts High-Performance Lithium Storage
A MICROFLUIDIC DEVICE TO PROMOTE EXOSOME SECRETION
Binder-free ultrathin SnS2 with superior reversibility of conversion reaction for high-rate lithium ion batteries
A High-Throughput Nanofluidic Device for Exosome Nanoporation to Develop Cargo Delivery Vehicles
A Three-Dimensional Simulation Analysis of Fluid Flow and Heat Transfer in Microchannel Heat Sinks with Different Structures
A HIGH-THROUGHPUT NANOFLUIDIC DEVICE FOR EXOSOME LOADING
Reducing polarization of lithium-sulfur batteries via ZnS/reduced graphene oxide accelerated lithium polysul fi de conversion
Binder-free and self-supported reduced graphene oxide coated Cu2SnS3/Carbon nanofibers for superior lithium storage
Interfacial Mechanical Strength Enhancement for High-Performance ZnS Thin-Film Anodes
Long-term cycling of core-shell Fe3O4-Polypyrrole composite electrodes via diffusive and capacitive lithiation
Analysis of Heat Transfer in Particle Velocity Sensor With Three-Wire Configuration
Lithium Fluoride Coated Silicon Nanocolumns as Anodes for Lithium Ion Batteries
Double-carbon protected silicon anode for high performance lithium-ion batteries
Study on the superior lithium storage performance of carbon/Sn–Mo oxide composite as lithium-ion battery anode
Oxygen-defective Co3O4 for pseudo-capacitive lithium storage
Porous carbon encapsulated Mn3O4 for stable lithium storage and its ex-situ XPS study
MOF-derived transition metal oxide encapsulated in carbon layer as stable lithium ion battery anodes
Pseudocapacitive P-doped NiCo2O4 microspheres as stable anode for lithium ion batteries
Binder-free C@NiCo2O4 on Ni foam with ultra-stable pseudocapacitive lithium ion storage
Design and fabrication of a D33-mode piezoelectric micro-accelerometer
Morphological and Structural Evolution of MnO@C Anode and Its Application in Lithium-Ion Capacitors
Cu4SnS4-Rich Nanomaterials for Thin-Film Lithium Batteries with Enhanced Conversion Reaction
Effects of annealing parameters on residual stress and piezoelectric performance of ZnO thin films studied by X-ray diffraction and atomic force microscopy
In-situ grown hierarchical ZnCo2O4 nanosheets on nickel foam as binder-free anode for lithium ion batteries
Ultrafine Mo-doped SnO2 nanostructure and derivative Mo-doped Sn/C nanofibers for high-performance lithium-ion batteries
A review on visible-light induced photoelectrochemical sensors based on CdS nanoparticles
Fabrication of substrate and film in MEMS using CMP
Noise analysis of the triaxial piezoelectric micro-accelerometer
On the measuring circuit of piezoelectric accelerometers
Controllable preparation of ultralong ZnO nanowire arrays based on microfluidics
Numerical analysis of the performance of microflown with SHS configuration
Electrodeposited binder-free NiCo2O4@carbon nanofiber as a high performance anode for lithium ion batteries
A new processing technique for fabrication of ultra-thin wafer
In-situ grown hierarchical ZnCo2O4nanosheets on nickel foam as binder-free anode for lithium ion batteries
Self-Assembled Cu-Sn-S Nanotubes with High (De)Lithiation Performance
ZnO nanoparticles anchored on nickel foam with graphene as morphology-controlling agent for high-performance lithiumion battery anodes
Reduced graphene oxide coated porous carbon-sulfur nanofiber as a flexible paper electrode for lithium-sulfur batteries
Three-dimensional tin dioxide–graphene composite nanofiber membrane as binder-free anode for high-performance lithium-ion batteries
Reduced graphene oxide as a dual-functional enhancer wrapped over silicon/porous carbon nanofibers for high-performance lithium-ion battery anodes
Design of a tri-axial micro piezoelectric accelerometer
Analytical and finite element analysis of a new tri-axial piezoelectric accelerometer
Study of a piezoelectric accelerometer based on d33 mode
Artificial solid electrolyte interphase with in-situ formed porosity for enhancing lithiation of silicon wafer
Ultrahigh-Performance Cu2ZnSnS4 Thin Film and Its Application in Microscale Thin-Film Lithium-Ion Battery: Comparison with SnO2
All-solid-state microscale lithium-ion battery fabricated by a simple process with graphene as anode
Three-Dimensional Cu2ZnSnS4 Films with Modified Surface for Thin-Film Lithium-Ion Batteries
A 3D all-solid-state thin film microbattery with inverted pyramid arrays
An ultrasonic micro knife based on triangular silicon horn chip
VCuxOythin film by magnetron sputtering as cathode material for thin film lithium-ion microbatteries
Composite films as high performance anode materials in thin film lithium-ion batteries
A micro direct formic acid fuel cell with PDMS fluid flow plates
A new design of a piezoelectric triaxial micro-accelerometer
Electrospun SnO2-Graphene composite nanofibers as high performance anode for lithium ion batteries
Electrospun PVDF/PMMA/SiO2membrane separators for rechargeable lithium-ion batteries
Preparation of strongly hydrophobic film with large area and flexibility based on micro fabrication
The research on electroplating technology used for RF micro inductor coil
Performance comparison and analysis of micro direct methanol fuel cell based on transparent flow channel with different width
An ultrasonic micro scalpel based on exponential horn silicon chip
All-solid-states thin film lithium-ion micro-battery with SnOx films doped with Cu as negative electrode
Growth and characterization of lead zirconate titanate (PZT) thin films
Anodic bonding between glass and silicon with a layer of SixNy thin film
Study on resonance of PZT piezoelectric plates and its detecting circuit
A theoretical study on silicon betavoltaics using Ni-63
Bending loss analysis of multiple-slot waveguide microrings
A microfabricated temperature sensor for hyperthermia
A supplementary system based on wireless accelerometer network for rehabilitation
Study on the equivalent circuit of a microfabricated ultrasonic micro-knife and PZT driving power
IEEE-NEMS 2010 welcome message
Acoustic character analysis of MEMS ultrasonic device for micro/nano particles separation
Proceedings of the 2010 Symposium on Piezoelectricity, Acoustic Waves and Device Applications, SPAWDA10: From the editors
Design of a three-axis high-g piezoresistive accelerometer
Study on driving and detection of micro-knife for minimally invasive surgery
Investigation of miniaturized radiators for microwave hyperthermia
Study on graphical electro-spinning of PZT nano-fibers
Optical surface sensing by bent slot waveguides
Study on detection of vibration of a microfabricated ultrasonic Micro-knife
Capacitive pressure sensor with circular island structure
Preparation and characterization of Al-doped ZNO piezoelectric thin films
Analysis and design of a micromachined Rb-85 filter in passive rubidium atomic clock
Growth and characterization of PZT thin films with a Pt/Ti layer on silicon substrate
Electron mobility in enhanced n-type silicon nanowire MOSFET
Analysis of high frequency breakdown of noble gases in a mems-based rb-87 lamp for miniaturized passive rubidium atomic clock
Study of GaAs nanowire electronic devices by using monte carlo method
Study of package technologies for implantable microdevices
Design and fabrication of a micro-knife for minimally invasive surgery
Micro cooling based on acoustic streaming
On the ultrasonic manipulation of micro/nano particles
Growth and characterization of PZT thin films
Acoustic damping of a four-clamped membrane in ultrasonic microdevice
Nuclear microbatteries for micro and nano devices
Characterization of PZT ferroelectric thin films prepared by a modified sol-gel method
Theoretical study of acoustic streaming inducedeffect in the microscale
Study of micro cooling based on acoustic streaming
Analysis of a piezoelectric micro-pump by using ansys
Characterization of PZT ferroelectric thin films prepared by a modified sol-gel mothed
A PZT/Si composite transducer for resonant ultrasound spectroscope
Acoustic analysis of single-walled carbon nanotube-based vacuum sensor
Design and fabrication of an ultrasonic microdevice for microparticles separation
Study of particles separation in the ultrasonic microdevice
Fluid motion induced by acoustic field in microchannel
Design of a bulk-micromachined piezoelectric accelerometer
Betavoltaic microbatteries using porous silicon
石墨烯微通道散热器的传热特性
传感器与微系统,2096-2436,2019-11-07.MEMS中基底和薄膜的CMP制造技术
光学精密工程,1004-924X,2018.基于MEMS技术的F-P腔滤波器分析与设计
传感器与微系统,2096-2436,2017.三轴高g压阻式微加速度计的设计
厦门大学学报(自然科学版),0438-0479,2014-07-28.用于承载铷原子钟滤光泡的高品质微腔体制备
传感器与微系统,1000-9787,2014-04-22.应用静电纺丝法制备PZT纳米纤维薄膜
传感器与微系统,1000-9787,2014-04-20.基于透明的不同流道宽度微型直接甲醇燃料电池的性能比较与分析
太阳能学报,0254-0096,2014-02-28.锆钛酸铅薄膜的生长与表征
光学精密工程,1004-924X,2013-11-15.微型电容式压力传感器硅基薄膜的设计与制备
厦门大学学报(自然科学版),0438-0479,2013-09-28.带有Si_3N_4薄膜的玻璃-硅-玻璃三层结构的阳极键合
传感器与微系统,1000-9787,2013-08-20.微机械圆盘谐振器的结构分析
厦门大学学报(自然科学版),0438-0479,2013-07-28.应用Monte Carlo方法对GaN基微型核电池的研究
传感器与微系统,1000-9787,2013-07-20.微型薄膜锂离子电池负极材料SnO_x掺杂Cu研究
传感器与微系统,1000-9787,2013-05-20.基于Fluent的微型直接甲醇燃料电池阳极流场结构分析
传感器与微系统,1000-9787,2013-03-20.采用硅和PDMS的堆栈式微型直接甲醇燃料电池的设计和制作
传感技术学报,1004-1699,2013-02-15.运用研磨和化学机械抛光技术制备高品质的石英薄膜
传感技术学报,1004-1699,2013-01-15.一种微型直接甲醇燃料电池的制作与测试
厦门大学学报(自然科学版),0438-0479,2012.采用环形岛棱结构的电容式压力传感器(英文)
光学精密工程 ,1004-924X ,2009.用于微小型化铷原子钟的MEMS Rb-85滤光泡的研究
传感技术学报 ,1004-1699 ,2009.微流体装置中超声流的研究
传感技术学报,1004-1699,2008-03-15.体硅加工的压电式微加速度计的设计
传感技术学报,1004-1699,2008-02-15.薄膜体声波谐振器的结构参数优化分析
传感技术学报,1004-1699,2008-02-15.双核架构在无线传感器网络节点设计中的应用
传感技术学报,1004-1699,2008-02-15.三丝型质点振速传感器的模型分析
测控技术,,2021-11-22.锂离子电池负极材料Cu2ZnSnS4的研究现状
微纳电子技术,1671-4776,2019-05-06.化学气相沉积法制备单层石墨烯的优化
微纳电子技术,1001-5007,2017.石墨烯湿法转移过程工艺优化
微纳电子技术,1001-5007,2017.微型薄膜锂离子电池正极材料LiCoO_2薄膜研究
传感器与微系统,2096-2436,2016-10-27.惯性闭锁开关的结构设计与分析
传感器与微系统,2096-2436,2016-10-27.MEMS阈值可调开关的仿真与实验分析
传感器与微系统,2096-2436,2016-10-11.微F-P腔可调谐滤波器关键工艺研究
传感器与微系统,2096-2436,2016-10-11.压阻式压力传感器中的信号调整
仪表技术与传感器 ,1002-1841 ,2009.用于能量传输的生物体植入式MEMS电感线圈的设计
生命科学仪器 ,1671-7929 ,2009.一种应用于微型传感器的直流升压电路
仪表技术与传感器 ,1002-1841 ,2009.碳纳米管声学桥的分析
功能材料与器件学报,1007-4252,2008-04-25.应用于超声共振检测的PZT/Si复合材料换能器
功能材料与器件学报,1007-4252,2008-04-25.应用超声分离微纳米颗粒的微型装置的设计与微制造
功能材料与器件学报,1007-4252,2008-02-25.ZnO压电薄膜的生长与应用
功能材料与器件学报,1007-4252,2008-02-25.