已发表成果:
WOK 论文 32 篇;其它论文 2 篇;
Characteristics of a microfluidic single-gate oscillator
Three-Dimensional Printed Conformal Thick-Film Conductive Lines for High-Temperature Applications
Conformal Fabrication of Thick Film Platinum Strain Gauge Via Error Regulation Strategies for In Situ High-Temperature Strain Detection
Combining 3-D Printing and Magnetron Sputtering Technique for Fabricating High-Temperature AgPd Thick Film Strain Gauge
Metal-based sandwich type thick-film platinum resistance temperature detector for in-situ temperature monitoring of hot-end components
All-Three-Dimensionally-Printed AgPd Thick-Film Strain Gauge with a Glass-Ceramic Protective Layer for High-Temperature Applications
La(Ca)CrO<sub>3</sub>-Filled SiCN Precursor Thin Film Temperature Sensor Capable to Measure up to 1100°C High Temperature
Oxidation and Ablation Behavior of Particle-Filled SiCN Precursor Coatings for Thin-Film Sensors
Conformal fabrication of functional polymer-derived ceramics thin films
3D printing of high-temperature thick film platinum resistance temperature detector array
Temperature-insensitive conductive composites for noninterference strain sensing
Conformal Fabrication of Functional Polymer-Derived Ceramics Thin Films
Three-Dimensional Printing of Platinum-Rhodium High-Temperature Thick Film Strain Gauge
A Focusing Method of Liquid Lens Based on Capacitance Detection
Nanofiber self-consistent additive manufacturing process for 3D microfluidics
An anti-oxidative coating made from particle-filled SiCN precursor for applications up to 800 degrees C
TiB2-Modified Polymer-Derived Ceramic SiCN Double-Layer Thin Films Fabricated by Direct Writing for High-Temperature Application
Development of thin film heat flux sensor based on transparent conductive oxide thermopile with antireflective coating
High-Sensitive Thin Film Heat Flux Gauge With ITO/In2O3 Thermopile on Nickel Alloys for Turbine Blade Applications
Thin-film temperature sensor made from particle-filled polymer-derived ceramics pyrolyzed in vacuum
Preparation and Properties Characterization of Nano-Composite Scaffold Getter With Induction Heating
Thin-Film Platinum Resistance Temperature Detector with a SiCN/ Yttria-Stabilized Zirconia Protective Layer by Direct Ink Writing for High-Temperature Applications
Rapid Printing of High-Temperature Polymer-Derived Ceramic Composite Thin-Film Thermistor with Laser Pyrolysis
Multistage Digital-to-Analogue Chip Based on a Weighted Flow Resistance Network for Soft Actuators
The influence of spatial arrangement of endpoints on output characteristics of ITO/In2O3 heat flux gauge
3D Printed Embedded Metamaterials
In Situ Laser Fabrication of Polymer-Derived Ceramic Composite Thin-Film Sensors for Harsh Environments
A microfluidically controlled concave-convex membrane lens using an addressing operation system
Surface roughness improvement of 3D printed microchannel
3D-printed membrane microvalves and microdecoder
Concentrated Multi-nozzle Electrospinning
A Fluidic Adder Circuit Based on a Microfluidic System
退火时间对ITO薄膜应变计性能的影响
微纳电子技术,1671-4776,2022-05-05.SiBCN高温薄膜温度传感器
微纳电子技术,1671-4776,2021-08-17.