Ultrasonic guided wave damage localization method for composite fan blades based on damage-scattered wave difference

BDBM: A distributed network simplification method for solving task allocation problems

Complex CFRP damage detection with dual multiscale 1DCNNs and self-selective fusion technique of guided waves

In Situ Monitoring of Failure Modes in Composite Bolted Joint Structures Using CB/CNT Piezoresistive Sensor

Damage Severity Assessment of Multi-Layer Complex Structures Based on a Damage Information Extraction Method with Ladder Feature Mining

Impact monitoring of large size complex metal structures based on sparse sensor array and transfer learning

An adaptive post-processing algorithm for strain reading abnormalities of FBG in cryogenic test

Quantitative diagnosis of fatigue hole-edge crack in composite laminates using guided wave and optical fiber feature fusion

An adaptive damage monitoring method based on transfer features mapped for advanced composite structures

Unsaturated out-of-plane permeability measured with three-dimensional flow monitoring by etched optical fiber sensors

Analytical insight into local defect resonance induced by disbond in multilayered structures

Impact monitoring on complex structure using VMD-MPE feature extraction and transfer learning

A Low-Velocity Impact Localization Method for Composite Stiffened Plate Based on AIC and WPT

Damage Quantification Method for Aircraft Structures Based on Multitask CNN-LSTM and Transfer Learning

A Hybrid Model and Data-Driven Approach for Online Diagnosis of Open-Circuit Faults in Grid-Tied Three-Phase VSIs

Resilient Distributed Information Fusion Under Multiple Malicious Attacks

Aeroengine Gas Path Parameter Trend Prediction Based on LSTM

Motion simulation analysis of wear debris in an integrated detection unit for lubricating oil

A decoupling method for solving the multi-agent path finding problem

Multiple criteria analysis for electrifying off-grid island using renewable energy microgrid or submarine cable

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

Distributed Estimation With Adaptive Cluster Learning Over Asynchronous Data Fusion

Quantitative Diagnosis of Fatigue Hole-Edge Crack in Composite Laminates Using Guided Wave and Optical Fiber Feature Fusion

Impact energy assessment of sandwich composites using an ensemble approach boosted by deep learning and electromechanical impedance

Full-field monitoring of the resin flow front and dry spot with noninvasive and embedded piezoelectric sensor networks

In-situ cure monitoring of thick CFRP using multifunctional piezoelectric-fiber hybrid sensor network

A novel Lamb wave-based multi-damage dataset construction and quantification algorithm under the framework of multi-task deep learning

An improved probabilistic diagnosis imaging algorithm for quantifying Hole-edge crack growth

Damage localization for composite structure using guided wave signals with Gramian angular field image coding and convolutional neural networks

A hybrid FCN-BiGRU with transfer learning for low-velocity impact identification on aircraft structure

Corrosion quantification of plate-type structures using Lamb wavefield and monogenic signal processing

Structural health dynamic monitoring for gear transmission based on guided waves

Lamb wave-based damage assessment for CFRP composite structures using a CHMM-based damage localization algorithm and a damage quantitative expression

Load Identification of Composite Structural Based on FBG Sensor and Convolutional Neural Network

Lamb wave-based damage imaging of CFRP composite structures using autoencoder and delay-and-sum

A novel damage index integrating piezoelectric impedance and ultrasonic guided wave for damage monitoring of bolted joints

Time series analysis and sparse sensor network-based impact monitoring for aircraft complex structures

Multiscale 1-DCNN for Damage Localization and Quantification Using Guided Waves With Novel Data Fusion Technique and New Self-Attention Module

Distributed Estimation with Novel Adaptive Data Selection Based on a Cross-Matching Mechanism

From Components to Converters: A Fundamental Topology Derivation Method for Nonresonant DCDC Converters Based on Graph Theory

Adhesively bonding a reusable PZT transducer for structural health monitoring (SHM) with an ethylene-acrylic acid copolymer adhesive

Advancing measurement of zero-group-velocity Lamb waves using PVDF-TrFE transducers: first data and application to in situ health monitoring of multilayer bonded structures

Monitoring of three-dimensional resin flow front using hybrid piezoelectric-fiber sensor network in a liquid composite molding process

Lamb wavefield-based monogenic signal processing for quantifying delamination in composite laminates

Qualitative Classification of Lubricating Oil Wear Particle Morphology Based on Coaxial Capacitive Sensing Network and SVM

An island-bridge packaging piezoelectric sensor for structural health monitoring in high-strain environments

Distributed Estimation With Cross-Verification Under False Data-Injection Attacks

The numerical and experimental investigations for the curing monitoring of woven composites with Lamb waves

Adaptive multitask clustering algorithm based on distributed diffusion least-mean-square estimation

FBG-based strain monitoring and temperature compensation for composite tank

A multi-level damage classification technique of aircraft plate structures using Lamb wave-based deep transfer learning network

Lamb Wave-Based Damage Localization and Quantification in Composites Using Probabilistic Imaging Algorithm and Statistical Method

Localization and quantification of different types of defects in composite structures with SMART sensor layers

A novel design of industrial real-time CT system based on sparse-view reconstruction and deep-learning image enhancement

The Numerical and Experimental Investigations for the Curing Monitoring of Woven Composites with Lamb Waves

Research progress on the application of acoustic emission to composite tanks

Investigation on New Method for Baseline Modelling of Aeroengine Exhaust Gas Temperature

Machine Learning Based Quantitative Damage Monitoring of Composite Structure

Weighted adaptive Kalman filtering-based diverse information fusion for hole edge crack monitoring

A New In Situ Coaxial Capacitive Sensor Network for Debris Monitoring of Lubricating Oil

Computer-Aided Systematic Topology Derivation of Single-Inductor Multi-Input Multi-Output Converters From Working Principle

Identification and imaging of multi-defects on a complicated composite structure by ultrasonic guided wave

Crack Quantification of Bolted Joints by Using a Parallelogram Eddy Current Array Sensing Film

Multi-energy microgrid robust energy management with a novel decision-making strategy

K-BP neural network-based strain field inversion and load identification for CFRP

Life-cycle health monitoring of composite structures using piezoelectric sensor network

Curing monitoring of bonded composite patch at constant temperature with electromechanical impedance and system parameters evaluation approach

Lamb wave-based damage localization and quantification algorithms for CFRP composite structures

A Novel Pentagonal EC Sensing Array Film for Quantifying Hole-Edge Crack of Bolted Joints

On-Site Monitoring of Composite Bolted Joints Looseness Using CB/PVP Nanocomposite Piezoresistive Sensor

Risk management for electrifying off-grid island using renewable energy microgrid

Real-Time Life-Cycle Monitoring of Composite Structures Using Piezoelectric-Fiber Hybrid Sensor Network

A distributed robust state estimation algorithm for power systems considering maximum exponential absolute value

Prognosis of fatigue cracks in an aircraft wing using an adaptive tunable network and guided wave based structural health monitoring

Multi-frequency localized wave energy for delamination identification using laser ultrasonic guided wave

A new interleaving eddy current array-based sensing film for fatigue crack quantification of bolted joints

Cure monitoring and damage identification of CFRP using embedded piezoelectric sensors network

Aero-engine status identification based on full-segment QAR data and convolutional neural network

On-site monitoring of bearing failure in composite bolted joints using built-in eddy current sensing film

A New Laser Ultrasonic Inspection Method for the Detection of Multiple Delamination Defects

Quantitative defect inspection in the curved composite structure using the modified probabilistic tomography algorithm and fusion of damage index

A flexible microfluidic sensor based on main-channel and branch-channels for aerodynamic pressure measurement

A Distributed Robust Power System State Estimation Approach Using t-Distribution Noise Model

Embedded FBG Sensor Based Impact Identification of CFRP Using Ensemble Learning

Principle and Topology Derivation of Single-Inductor Multi-Input Multi-Output DC-DC Converters

Graph Theory-Based Programmable Topology Derivation of Multiport DC-DC Converters With Reduced Switches

Identification of multi-defects in an arched composite structure by the corrected probabilistic diagnostic imaging with the fused damage index

Leaky Lamb wave-based resin impregnation monitoring with noninvasive and integrated piezoelectric sensor network

Condition Monitoring of Power Electronics Converters Based on Digital Twin

A Flexible Pressure Sensor Based on Composite Piezoresistive Layer

An Eddy Current-Based Structural Health Monitoring Technique for Tracking Bolt Cracking

An Independently Controlled Magnetic Coupling Multi-Output Buck Converter With Mixed Modes for Unbalanced Loads

Hidden corrosion detection using laser ultrasonic guided waves with multi-frequency local wavenumber estimation

Electromechanical Impedance Model for Free 1D Thin-Walled Piezoelectric Ceramics with a Novel Derivation

Magnetic Coupling Branch Based Dual-Input/Output DC-DC Converters With Improved Cross-Regulation and Soft-Switching Operation

Synthesis of Integrated Multiport DC-DC Converters With Reduced Switches

The Design and Verification of an Active SAMSR Ultrasonic Guided Wave Monitoring System with Ultra-Low Crosstalk

Electromechanical impedance-based damage localization with novel signatures extraction methodology and modified probability-weighted algorithm

Assessment of low-velocity impact damage in composites by the measure of second-harmonic guided waves with the phase-reversal approach

Propagation characteristics of ultrasonic weld-guided waves in Friction stir welding joint of same material

An Improved Matching Pursuit-Based Temperature and Load Compensation Method for Ultrasonic Guided Wave Signals

Reusable piezoelectric transducer for structural health monitoring using both Lamb wave and electromechanical impedance modes

A passive localization method for stiffened composite structures with a parameterized laminate model

Monitoring of resin flow front and degree of cure in vacuum-assisted resin infusion process using multifunctional piezoelectric sensor network

In-situ monitoring of liquid composite molding process using piezoelectric sensor network

Energy Management for a Microgrid With Different Charging and Discharging Priorities of Batteries Using Modified Grey Wolf Optimizer

A flexible capacitive sensor based on the electrospun PVDF nanofiber membrane with carbon nanotubes

Monitoring of fiber-reinforced composite single-lap joint with electromechanical impedance of piezoelectric transducer

Monitoring of Fatigue Crack Propagation by Damage Index of Ultrasonic Guided Waves Calculated by Various Acoustic Features

A novel electromechanical impedance model for surface-bonded circular piezoelectric transducer

Computer-Aided Identification of Equivalent Power Electronics Converters

Health Monitoring of Metallic Structures with Electromechanical Impedance and Piezoelectric Sensors

Active Monitoring of Fatigue Crack in the Weld Zone of Bogie Frames Using Ultrasonic Guided Waves

Identification and compensation technique of non-uniform temperature field for lamb wave-and multiple sensors-based damage detection

Modified electromechanical impedance-based disbond monitoring for honeycomb sandwich composite structure

An Independently Controlled Single-Input-Dual-Output Buck Converter with Coupled Inductor Having 1:1 Turns Ratio

Baseline-free damage imaging for metal and composite plate-type structures based on similar paths

Damage Detection of Thermal Barrier Coating by Ultrasonic Guided Wave

A real-time electromechanical impedance-based active monitoring for composite patch bonded repair structure

EGT Baseline Model of Aeroengine Based on Kernel Principal Component Analysis and Deep Belief Network

Characterization of Microstructural Evolution by Ultrasonic Nonlinear Parameters Adjusted by Attenuation Factor

Piezoelectric transducer-based structural health monitoring for aircraft applications

A flexible ionic liquid-polyurethane sponge capacitive pressure sensor

A novel eddy current array sensing film for quantitatively monitoring hole-edge crack growth in bolted joints

A two-dimensional eddy current array-based sensing film for estimating failure modes and tracking damage growth of bolted joints

Crack Monitoring for Hot-Spot Areas Under Time-Varying Load Condition Based on FCM Clustering Algorithm

On-site health monitoring of composite bolted joint using built-in distributed eddy current sensor network

Electrospun Ionic Nanofiber Membrane-Based Fast and Highly Sensitive Capacitive Pressure Sensor

Fatigue crack identification in weld zone of bogie using guided wave

Failure monitoring of bolted joints by using eddy current array sensing film

An Enhanced Fault-Tolerant DC-DC Converter with Redundant Circuit and Topology Reconstruction

High strain survivability of piezoceramics by optimal bonding adhesive design

A flexible capacitive pressure sensor based on ionic liquid

A two-step impact localization method for composite structures with a parameterized laminate model

Quantitative monitoring of hole-edge damage growth using eddy current array sensor-based intelligent bolt

In-situ capacitive sensor for monitoring debris of lubricant oil

Programmable Topology Derivation of Integrated Three-Port DC-DC Converters with Reduced Switches for Low-Cost Applications

Highly flexible ionic liquid capacitive sensor for aerodynamic pressure measurement

Hole-edge damage monitoring of bolted composite joints with a flexible eddy current array sensing film

Study on Damage Detection Resolution Based on Lamb Wave and TR-MUSIC Algorithm

Propagation characteristics of stress wave in stiffened composite structure during low-velocity impact

Research on structural health monitoring method based on multisource sensing information fusion

Characteristics study of in-situ capacitive sensor for monitoring lubrication oil debris

Random demodulation for structural health monitoring excited by the five-cycle sine burst

Spectral element method for modeling lamb wave interaction with open and closed crack

Principle and Topology Synthesis of Integrated Single-Input Dual-Output and Dual-Input Single-Output DC-DC Converters

A reverberation-ray matrix method for guided wave-based non-destructive evaluation

Numerical modeling of the load effect on PZT-induced guided wave for load compensation of damage detection

Identification of impact damages in aircraft composites by nonlinear guided wave technique

Study on resisting-high-strain performance of piezoelectric transducer

Guided wave-based structural health monitoring of the full-scale composite aircraft tail in static test