已发表成果:
WOK 论文 61 篇;中文核心 20 篇;专利发明 15 个;
Analytical method of mutual inductance for T-R rectangular coils perpendicular to the planar medium
Thickness Measurement of Titanium-Alloy Sheets Based on the Resistance-Frequency Eddy Current Method
Instantaneous flow area calculation for modeling an axial piston pump: A point cloud-based technique
Metal film thickness measurement using phase linearity feature for immunity to lift-off effect
Advanced winding tension method for preventing axial slip of the center-wound roll
A new probe-based electromagnetic non-destructive testing method for carbon fiber-reinforced polymers utilizing eddy current loss measurements
A modified conductive network used to characterize the conductivity of carbon fibre reinforced polymers in eddy current testing
A novel method for calculating the mutual inductance between two perpendicular coils in wireless power transfer
Improving interface quality for 1-cm<SUP>2</SUP> all-perovskite tandem solar cells
Resistance-frequency eddy current method for electrical conductivity measurement
A novel method based on eddy-current equilibrium for improving the sensitivity of fiber orientation detection
A novel model for calculating the impedance of arbitrarily-shaped coils with perpendicular to the planar medium
Mutual inductance model of double printed circuit board-based coplanar rectangular spiral coils for eddy-current testing
A self-frequency-conversion eddy current testing method
A novel electromagnetic nondestructive testing method for carbon fiber reinforced polymer laminates based on power loss
Detection of delamination defects inside carbon fiber reinforced plastic laminates by measuring eddy-current loss
An electromagnetic acoustic transducer with electromagnetic pulse restraining
Study on bandgap characteristics of particle damping phononic crystal
Non-destructive testing of carbon-fiber-reinforced plastics with a PCB-based T-R probe
Exploring bandgap generation mechanism of phonon crystal
Analytical model for rectangular side-by-side probe in eddy-current non-destructive inspection
Self-resonance eddy-current testing method in noncontact detection of carbon fiber reinforced plastics
Method for the calculation of coupling coefficient between two arbitrary-shaped coils
Analytical calculations of self- And mutual inductances for rectangular coils with lateral misalignment in IPT
Research on a new electromagnetic acoustic detection technique for restraining the electromagnetic interference blind zone
Non-destructive testing for carbon-fiber-reinforced plastic (CFRP) using a novel eddy current probe
Analytical computation of mutual inductance between two rectangular spiral coils with misalignments for wireless power applications
Application of ECT technology with a miniature PCB-based spiral coil in the visualization of CFRP laminates
Analytical Impedance Model for an Arbitrary Orthogonal Polyline Coil Using Vertex Position-shape Description
Impedance Analysis of a Meander Coil with Rectangular Cross Section Above a Planar Conductor Using Vertex Description
Impedance calculation of arbitrary-shaped thin-walled coils for eddy-current testing of planar media
Calculation of self- and mutual inductances of rounded rectangular coils with rectangular cross-sections and misalignments
Analytical model of mutual coupling between rectangular spiral coils with lateral misalignment for wireless power applications
Analytic modeling method for meander coil impedance with error compensation
Analytical solutions for the self- and mutual inductances of arbitrary triangular coils with rectangular cross-section
Analytical Modeling and Analysis of Mutual Inductance Coupling of Rectangular Spiral Coils in Inductive Power Transfer
Analytical calculation of mutual coupling between two misaligned rectangular coils with rectangular cross-section in wireless power applications
Composite magnetic flux leakage detection method for pipelines using alternating magnetic field excitation
New NDT method for ferromagnetic materials based on differential permeability
A Novel Non-destructive Testing Method by Measuring the Change Rate of Magnetic Flux Leakage
Analytical model for mutual inductance between two rectangular coils in driver pickup mode for eddy current testing
Mechanism analysis of influence of surface-breaking orientation on magnetic leakage field distribution
Novel MFL method for pipeline crack no blind spot detection using composite excitation
New MFL detection method based on differential peak extraction using dual sensors
New impedance analytical and modeling method of any orthogonal polyline coil
New nondestructive test method with empirical research using local hysteretic loop characteristics
3-D FEM Simulation and Analysis on the Best Range of Lift-off Values in MFL Testing
Voltage tracking modulation method using FCS-MPC
A SVPWM overmodulation method based on three-phase bridge arm coordinates
Research on dynamic real-time error correction method using Wiener-based neural network
New method of variable excitation MFL testing under the condition of small magnetizing apparatus
Optimization of taper winding tension in roll-to-roll web systems
Overmodulation strategy for flux trajectory tracking PWM and analysis of its characteristics
Mechanism and experimental research on skin depth in AC magnetic flux leakage testing
A novel multi-class support vector machines using probability voting strategy and its application on fault diagnosis of gearbox
3-D FEM simulation of lift-off effects on magnetic flux leakage testing
A novel method of space vector pulse width modulation with constraints
PWM method of flux linkage trajectory tracking and analysis of its characteristics
Simulation and analysis on the best range of lift-off values in MFL testing
3-D simulation of remote field eddy current detection for stress corrosion cracks in pipeline
Approach to design tension of filament winding for thick composite pipes using a neural network
任意两个平面多边形螺线线圈间互感系数的解析模型
厦门大学学报(自然科学版),0438-0479,2022-05-11.一种利用顶点位形描述的任意正交折线线圈阻抗解析建模新方法
电子学报,0372-2112,2018.感应电能传输中矩形螺线线圈互感耦合的解析建模与分析
电工技术学报,1000-6753,2018.一种带有误差补偿项的折线线圈阻抗解析建模新方法
电机与控制学报,1007-449X,2018.表面缺陷的方向性对漏磁场分布的影响
物理学报,1000-3290,2017-02-20.基于微分磁导率的铁磁性材料无损检测新方法
仪器仪表学报,0254-3087,2017.利用复合激励的无盲点管道裂纹漏磁检测新方法
仪器仪表学报,0254-3087,2016-10-15.双传感器差分峰值侦测的漏磁检测新方法
仪器仪表学报,0254-3087,2016-06-15.一种任意正交折线线圈阻抗的解析建模新方法
仪器仪表学报,0254-3087,2016-05-15.利用局部磁滞回线特性的无损检测新方法
仪器仪表学报,0254-3087,2015-10-15.基于FCS-MPC的电压跟踪调制方法
电力自动化设备,1006-6047,2015-03-10.小型磁化器条件下的变励磁MFL检测新方法
仪器仪表学报,0254-3087,2015-01-15.基于三相桥臂坐标的SVPWM过调制方法
电工技术学报,1000-6753,2015-01-05.一种基于磁链轨迹跟踪的过调制新策略及其特性分析
电机与控制学报,1007-449X,2014-08-15.交流漏磁检测法趋肤深度的机理与实验研究
仪器仪表学报,0254-3087,2014-02-15.漏磁检测中提离值影响的三维有限元仿真分析
应用基础与工程科学学报,1005-0930,2013-12-15.一种带约束的电压空间矢量脉宽调制方法
电网技术,1000-3673,2013-10-05.一种磁链轨迹跟踪的PWM方法及其特性分析
电机与控制学报,1007-449X,2013-06-15.厚壁复合材料管纤维缠绕张力的神经网络设计方法
复合材料学报,1000-3851,2012.一种大卷装带材收卷过程中张力控制的优化设计方法
测控技术,1000-8829,2011.