已发表成果:
WOK 论文 16 篇;中文核心 8 篇;其它论文 17 篇;
Lumped Parameter Modeling and Excitation Sources Analysis of Linear Conjugated Internal Gear Pumps
Instantaneous flow area calculation for modeling an axial piston pump: A point cloud-based technique
A New Coupled Dynamic Model to Study the Vibration and Lubrication Characteristics of Slipper/Swash-Plate Interface in an Axial Piston Pump
A New Coupled Dynamic Model to Study the Vibration and Lubrication Characteristics of Slipper/Swash-Plate Interface in an Axial Piston Pump
Influence of Mating Clearance on Flow Field Characteristics of Linear Conjugate Internal Gear Pump
Dynamic modelling of swashplate with local defects in axial piston pump and coupled vibration analysis
Analysis and Multi-objective Optimization of Oil Film Lubrication Characteristics of Multi-arc Groove Spherical Valve-plate Structure
Modeling and Experimental Validation of Lubrication Characteristics of Spherical Valve-plate Pairs with Conical Cylinder Block
Multi-objective Optimization of Cylinder/Valve-plate Sealing Ring in Axial Piston Pump Based on Genetic Algorithm
Theoretical and Simulation Investigations on Flow Ripple Reduction of Axial Piston Pumps Using Nonuniform Distribution of Pistons
A theoretical dynamic model to study the vibration response characteristics of an axial piston pump
Modeling and Analysis of Oil Film Lubrication Characteristics of Valve-Plate Pair in Axial Piston Motor
Transfer path analysis and its application in low-frequency vibration reduction of steering wheel of a passenger vehicle
Study on the load-carrying capacity of surface textured slipper bearing of axial piston pump
Chatter detection for milling using novelp-leader multifractal features
A Spare Support Vector Machine Based Fault Detection Strategy on Key Lubricating Interfaces of Axial Piston Pumps
配合间隙对柱塞-滑靴组件动力学及油膜润滑特性的影响
振动与冲击,1000-3835,2024-11-28.柱塞泵缸体-主轴花键齿面修形及抗磨设计
中国机械工程,1004-132X,2024-11-19.柱塞泵缸体-主轴花键副碰撞动力学建模及振动响应分析
航空动力学报,1000-8055,2024-10-11.柱塞泵缸体-主轴花键副微动损伤及疲劳预测
西南交通大学学报,0258-2724,2024-06-17.直线共轭内啮合齿轮泵集中参数法建模与激振源研究
农业机械学报,1000-1298,2024-04-26.配合间隙对直线共轭内啮合齿轮泵流场特性的影响
农业机械学报,1000-1298,2023-12-13.多弧槽球面配流副润滑特性分析与多目标优化
农业机械学报,1000-1298,2022-11-30.轴向柱塞马达平面配流副油膜润滑特性建模及分析
华南理工大学学报(自然科学版),1000-565X,2021-02-15.液压缸 屈曲载荷评估方法
国家市场监督管理总局;国家标准化管理委员会,,2024-06-29.液压传动 油液噪声特性测定 第1部分:通则
国家市场监督管理总局;国家标准化管理委员会,,2024-05-28.液压传动 油液噪声特性测定 第2部分:管道中油液声速的测量
国家市场监督管理总局;国家标准化管理委员会,,2024-05-28.液压缸 试验方法
国家市场监督管理总局;国家标准化管理委员会,,2023-11-27.微型高速轴向柱塞泵转子系统力矩损失仿真分析
液压与气动,1000-4858,2023-11-15.液压传动 测量技术 第1部分:通则
国家市场监督管理总局;国家标准化管理委员会,,2023-08-06.液压传动 测量技术 第2部分:密闭回路中平均稳态压力的测量
国家市场监督管理总局;国家标准化管理委员会,,2023-08-06.流体传动系统及元件 参考词典规范 第1部分:组织结构概述
国家市场监督管理总局;国家标准化管理委员会,,2023-05-23.液压传动 泵、马达 稳态性能的试验方法
国家市场监督管理总局;国家标准化管理委员会,,2023-03-17.轴向柱塞泵壳体降噪区域识别
液压与气动,1000-4858,2022-08-15.锥形缸体球面配流副润滑特性建模及试验验证
中国机械工程,,2021-12-22.基于遗传算法的轴向柱塞泵配流盘密封环结构多目标优化
农业机械学报,,2021-11-19.微型高速轴向柱塞泵动力学特性分析
液压与气动,1000-4858,2021-10-14.轴向柱塞泵缸体位姿机液一体化联合仿真
液压与气动,1000-4858,2021-04-15.《液压传动与控制》课程教学现状与改革措施
中国多媒体与网络教学学报(上旬刊),1673-2499,2020-07-01.新工科建设背景下高校机械工程本科创新人才培养的思考
科教导刊(下旬),1674-6813,2020-05-25.新工科建设背景下高校机械工程本科创新人才培养的思考
科教导刊(下旬),1674-6813,2020-05-25.