已发表成果:
WOK 论文 195 篇;中文核心 62 篇;其它论文 28 篇;专利发明 45 个;
Improvements to Enhance Robustness of Third-Order Scale-Independent WENO-Z Schemes
Conceptual design methodology and performance evaluation of turbine-based combined cycle inward-turning inlet with twin-design points
A unified transition mechanism from shock to detonation waves
Achieving self-supported enclosed voids and machinable support structures in topology optimization for additive manufacturing
Numerical simulation of mixing characteristic of rear variable area bypass injector with lobed structure
Flow characteristics and propulsive performance of oblique detonation waves induced by a transverse jet
Fully appreciating the impossibility of shock wave regular reflection from the axis of symmetry in axisymmetric internal flows
Extended state observer-based continuous finite time control for a fixed-wing vertical take-off and landing unmanned aerial vehicle
Efficient aerodynamic optimization of turbine blade profiles: an integrated approach with novel HDSPSO algorithm
Numerical simulations and theoretical analysis of the forward shock wave in a non-premixed air-breathing rotating detonation combustor
A theoretical method for oblique and curved detonation waves
Flight analysis and optimization design of vectored thrust eVTOL based on cooperative flight/propulsion control
Aerodynamic shape optimization of high-speed helicopter rotor airfoil based on deep learning
Evolution Characteristics Analysis of Supersonic Inlet Buzz with High-Order Dynamic Mode Decomposition Method
Novel design method for inward-turning inlets with non-uniform inflow
A gradient aerodynamic optimization method based on deep learning
Analytical reconstruction of axisymmetric curved shock wave/boundary layer interactions
Curved detonation and its reflections
Two-dimensional temperature field inversion of turbine blade based on physics-informed neural networks
Mesoscopic Kinetic Approach of Nonequilibrium Effects for Shock Waves
Conceptual Design Methodology and Performance Evaluation of Inward-Turning Tbcc Inlet with Twin-Design Points
Linear lattice Boltzmann flux solver with compact third-order finite volume method for acoustic propagation simulations on three-dimensional hybrid unstructured grids
A New Sixth-Order Central Weno Scheme for Solving Hyperbolic Conservation Laws
Stream-Surface Iteration-Based Flowfield Calculation Method for Pressure-Controllable Waverider Design
Numerical investigations on interactions between 2D/3D conical shock wave and axisymmetric boundary layer at Ma=2.2 (vol 144, 108769, 2024)
A constant pressure differential valve and its controlling characteristics for aero engine
Achieving Self-Supported Enclosed Voids and Machinable Support Structures in Topology Optimization for Additive Manufacturing
Numerical investigations on interactions between 2D/3D conical shock wave and axisymmetric boundary layer at Ma=2.2
Experimental and numerical study of combustion characteristics of ammonia-hydrogen-air swirling flame with/without secondary air injection
Numerical study of steady flow characteristics of a rear variable-area bypass injector with alternating area regulator
An Analysis Method to Identify the Importance of Technical Parameters for Complex Products
Airfoils optimization based on deep reinforcement learning to improve the aerodynamic performance of rotors
Mach reflection of three-dimensional curved shock waves on V-shaped blunt leading edges
Three-dimensional high-order finite-volume method based on compact WENO reconstruction with hybrid unstructured grids
Numerical Study on Effects of Expansion Wave on Wedge-Stabilized Oblique Detonation Wave
Investigating the flow characteristics and thermodynamic performance of curved detonation waves
Analysis and Suppression of Thrust Trap for Turbo-Ramjet Mode Transition with the Integrated Optimal Control Method
Linear Lattice Boltzmann Flux Solver with Compact Third- Order Finite Volume Method for Acoustic Propagation Simulations on Three-Dimensional Hybrid Unstructured Grids
Nonlinear adaptive flight control system: Performance enhancement and validation
Reflection and transition of planar curved shock waves
Numerical investigations on interactions between 2D/3D conical shock wave and axisymmetric boundary layer at Ma=2.2
Aerodynamic optimization of airfoil based on deep reinforcement learning
Analytical model for curved-shock Mach reflection
Analytical model for predicting the length scale of shock/boundary layer interaction with curvature (vol 34, 111701, 2022)
Acoustic multipole source-simplified lattice Boltzmann method for simulating acoustic propagation problems
Deep-learning-based aerodynamic shape optimization of rotor airfoils to suppress dynamic stall
Multi-ducted twin-turbines ejector-ramjet/scramjet combined cycle engine for hypersonic civil vehicles
Nonlinear adaptive flight control system: Performance enhancement and validation
Coupling characteristic analysis and propagation direction control in hydrogen-air rotating detonation combustor with turbine
Formation and Evolution of Cellular Structures in Wedge-Induced Oblique Detonations
Automatic Landing System Design for Unmanned Fixed-Wing Vehicles via Multivariable Active Disturbance Rejection Control
Thermal insulation characteristics of high-temperature heat seals for hypersonic aero-engines
Robust gain-scheduled missile autopilot design based on multifrequency extended state observers
Digital Twin System for Propulsion Design of UAVs
Third-order scale-independent WENO-Z scheme to achieve optimal order at critical points
Quasi-linear analysis of dispersion relation preservation for nonlinear schemes
Analytical model for predicting the length scale of shock/boundary layer interaction with curvature
A Simplified Linearized Lattice Boltzmann Method for Acoustic Propagation Simulation
Flow characterization during the flame acceleration and transition-to-detonation process with solid obstacles and fluid jets
Inverse Design of Hypersonic Waveriders with Variable Cross-Section Shock Waves
Pressurization Characteristics and Flow Field Analysis of Methane/Oxygen Rotating Detonation Combustor at High Temperature and High Pressure Inlets
An ultralight dual-wavelength and dual-beam chemical sensor on small UAV for in-situ determination of phosphate and nitrite in surface water
Theoretical model of 2D curved shock wave/turbulent boundary layer interaction
An efficient frequency-domain prediction method for aeroacoustic radiation and scattering using equivalent sources
Design Method of Control Law of Variable-Geometry Ramjet Based on Trajectory Optimization
Improvements to enhance robustness of third-order scale-independent WENO-Z schemes
Numerical Demonstration of Unsupervised-Learning-Based Noise Reduction in Two-Dimensional Rayleigh Imaging
A ranking-system-based switching particle swarm optimizer with dynamic learning strategies
Formation of multiple detonation waves in rotating detonation engines with inhomogeneous methane/oxygen mixtures under different equivalence ratios
Linear discrete velocity model-based lattice Boltzmann flux solver for simulating acoustic propagation in fluids
Active Flow Control of Helicopter Rotor Based on Coflow Jet
On the evolutions of triple point structure in wedge-stabilized oblique detonations
AVEI-BO: an efficient Bayesian optimization using adaptively varied expected improvement
Linear lattice Boltzmann flux solver for simulating acoustic propagation
<p>Accelerating optimization of IN718 by mapping alloying effects on phase stabilities and mechanical properties using high-throughput calculations</p>
Improved delayed detached eddy simulation of supersonic combustion fueled by liquid kerosene
Study of shock wave/boundary layer interaction from the perspective of nonequilibrium effects
Thermodynamic Process and Performance Analysis of Inter-Stage Turbine Rotating Detonation Turboshaft Engine
Design of multistage compression waverider based on the local-turning osculating cones method
Diagnostic in a reverse-flow aeroengine model combustor under elevated inlet pressure and temperature using spontaneous Raman
Study on the flow characteristics in the non-detonation reaction zones of wedge-induced oblique detonation transitions
Three-dimensional simulation of a rotating detonation engine in ammonia/hydrogen mixtures and oxygen-enriched air
Development of a new type of weighted compact scheme
Development of learning-based noise reduction and image reconstruction algorithm in two dimensional Rayleigh thermometry
Numerical Investigation on the Influence of Geometrical Parameters on the Aerodynamic Performance of a Small-Scale Ducted Fans System
Trajectory Planning for Emergency Landing of VTOL Fixed-Wing Unmanned Aerial Vehicles
Integration Layout of Double-Modules Chin Inward-Turning Inlet and Conical Forebody
NOx emission and energy conversion efficiency studies on ammonia-powered micro-combustor with ring-shaped ribs in fuel-rich combustion
Improved Whale Optimization Algorithm and Turbine Disk Structure Optimization
Shock dynamics and expansion characteristics of an aerospike nozzle and its interaction with the rotating detonation combustor
On Developing Piecewise Rational Mapping with Fine Regulation Capability for WENO Schemes
Mixing and transient combustion processes of scramjet combustor with transverse injector and hypermixer
Performance coupling analysis and optimal design of rocket-assisted turbine-based combined cycle engines
Method of curved-shock characteristics with application to inverse design of supersonic flowfields
Discrete gas-kinetic scheme-based arbitrary Lagrangian-Eulerian method for moving boundary problems
Numerical Investigation on Unsteady Flow of Nozzle in Rotating Detonation Engine
Mesoscopic kinetic approach for studying nonequilibrium hydrodynamic and thermodynamic effects of shock wave, contact discontinuity, and rarefaction wave in the unsteady shock tube
Meshfree lattice Boltzmann flux solver for compressible inviscid flows
A competitive mechanism integrated multi-objective whale optimization algorithm with differential evolution q
Propagation Mode of Detonation Wave in a Plane-Radial Rotating Detonation Combustion Chamber
Meshfree method based on discrete gas-kinetic scheme to simulate incompressible/compressible flows
Model characterization and mechanical property analysis of bimetallic functionally graded turbine discs
Numerical investigation of dynamic stall suppression of rotor airfoil via improved co-flow jet
Modeling and Design of an Aircraft-Mode Controller for a Fixed-Wing VTOL UAV
Aerothermodynamic study of Two-Stage-To-Orbit system composed of wide-speed-range vehicle and rocket
Analysis of Effects of Mode Transition Type on Performance of Mode Transition for 3D Inward-Turning Combined Inlet
Integration of inward-turning inlet with airframe based on dual-waverider concept
Effects of wall cooling with microchannels on swirl combustor performance
Study of regular reflection shock waves using a mesoscopic kinetic approach: Curvature pattern and effects of viscosity
Numerical demonstration of 3D reduced order tomographic flame diagnostics without angle calibration
Generalized form of interpolation-supplemented lattice Boltzmann method for computational aeroacoustics
Direct Numerical Simulation of Breakup Characteristics of Power Law Fluid Impingement Jet
Local-Turning Osculating Cones Method for Waverider Design
Affine formation maneuver control of high-order multi-agent systems over directed networks
Immune genetic algorithm based multi-UAV cooperative target search with event -triggered mechanism
Data-driven three-dimensional super-resolution imaging of a turbulent jet flame using a generative adversarial network
Efficiency Analysis and Integrated Design of Rocket-Augmented Turbine-Based Combined Cycle Engines with Trajectory Optimization
Acoustic Modeling and Vibration Characteristics of Supersonic Inlet Buzz
A gain matrix approach for robust distributed 3D formation control with second order swarm systems
Characteristics of reaction zone in a dual-mode scramjet combustor during mode transitions
Multiple Osculating Cones' Waverider Design Method for Ruled Shock Surfaces
Progress and challenges of next generation green supersonic civil aircraft
Spatiotemporal Characterization and Suppression Mechanism of Supersonic Inlet Buzz with Proper Orthogonal Decomposition Method
Novel thermal barrier coatings with hexagonal boron nitride additives resistant to molten volcanic ash wetting
Second-order curved shock theory
Dual Waverider to Integrate External and Internal Flows
Study on Dynamic Stall Control of Rotor Airfoil Based on Coflow Jet
Lattice Boltzmann simulation for unsteady shock wave/boundary layer interaction in a shock tube
Local-turning osculating cones method for waverider design
Modeling of shrinkage characteristics during investment casting for typical structures of hollow turbine blades
Investigation of acoustic propagation and source localization in a hot jet flow
Analysis on the Low Speed Performance of an Inward-Turning Multiduct Inlet for Turbine-Based Combined Cycle Engines
Effects of Shear Layer Characteristics on Acoustic Propagation and Source Localization
Femtosecond laser helical drilling of nickel-base single-crystal super-alloy: Effect of machining parameters on geometrical characteristics of micro-holes
Experimental Study of TBCC Engine Performance in Low Speed Wind Tunnel
Numerical simulation of flow field under coaxial rigid rotor/fuselage interaction
Experimental Investigation on the Spatial-temporal Evolution of the hole formation during Laser Helical Drilling
Direct numerical simulation of impinging jet with non-Newtonian shear thinning properties at high ambient pressure
Impact interaction of in-flight high-energy molten volcanic ash droplets with jet engines
Characteristics investigation on supersonic inlet buzz with dynamic mode decomposition method
Affine formation maneuver tracking control of multiple second-order agents with time-varying delays
Coevolution Pigeon-Inspired Optimization with Cooperation-Competition Mechanism for Multi-UAV Cooperative Region Search
Two-layer distributed hybrid affine formation control of networked Euler-Lagrange systems
Affine Formation Maneuver Control of Linear Multi-Agent Systems with Undirected Interaction Graphs
Thermal protection system and thermal management for combined-cycle engine: Review and prospects
Distributed Adaptive Affine Formation Control for Heterogeneous Linear Networked Systems
Affine transformation based formation maneuvering for discrete-time directed networked systems
New advances in multiple autonomous aerial robots formation control technology
Target-enclosing affine formation control of two-layer networked spacecraft with collision avoidance
Compressible lattice Boltzmann simulations on high-performance and low-cost GeForce GPU
A unified correction method for the acoustic refraction (UCMAR) caused by a three dimensional shear layer
Effects of Transverse Jet Parameters on Flame Propagation and Detonation Transition in Hydrogen-Oxygen-Argon Mixture
Numerical Simulation of Aerodynamic Characteristics of Helicopter Rotor with Tip Slots
Effects of jet in crossflow on flame acceleration and deflagration to detonation transition in methane-oxygen mixture
Affine formation maneuver control of multi-agent systems with directed interaction graphs
Aerodynamic Combination Design Concept for Hypersonic Waverider Forebody and Inward Turning Inlet
Review of Europe Re-Entry Flight Test Technology
Reversal design of external compression bump of Bump inlet based on osculating cones principle
Direct numerical simulation of sheet breakup formed by two impinging jets with non-Newtonian shear thinning properties
A Hermite-based lattice Boltzmann model with artificial viscosity for compressible viscous flows
Geometric Parameters Evolution Experiment of Hole During Femtosecond Laser Helical Drilling
A double-distribution-function lattice Boltzmann model for high-speed compressible viscous flows
Concurrent Optimal Trajectory Planning for Indoor Quadrotor Formation Switching
Pre-Injection of Cracked Hydrocarbon Fuel in Hypersonic Inlets
Integration design and analysis for curved conical forebody and three-dimensional inward turning inlet
Affine formation control for heterogeneous multi-agent systems with directed interaction networks
An inverse design tool for two-dimensional blade generation in aerospace engineering education
Design of a Three-Dimensional Hypersonic Inward-Turning Inlet with Tri-Ducts for Combined Cycle Engines
Investigation of adaptive slot control method for starting characteristics of hypersonic inlets
Three-dimensional coupled double-distribution-function lattice Boltzmann models for compressible Navier-Stokes equations
An Experimental Investigation of the Effects of Femtosecond Laser Helical Drilling: Influence of Process Parameters
Direct numerical simulation of impinging jet breakup with non-Newtonian properties at low Weber number
Lattice Boltzmann simulation for high-speed compressible viscous flows with a boundary layer
Conversion and Application of Streamline-Characteristic Coordinate System in Supersonic Flows
An implicit-explicit finite-difference lattice Boltzmann subgrid method on nonuniform meshes
Injection and Mixing Performance in an Elliptical Scramjet Combustor
Dual waverider concept for inlet-airframe integration with controllable wall pressure distribution
Mixing characteristics of fuel injection in supersonic combustor considering upstream streamwise vortices
Numerical investigation of fuel pre-injection with different injector configurations in hypersonic inlet
Effects of the chemical nonequilibrium flow on the performance of three dimensional expansion nozzle
Effect of outflow vortexof 3d inlet on fuel injection and mixing in a scramjet combustor
Study on effects of fluidic obstacle on flame acceleration and deflagration-to-detonation transition
Inverse method of characteristics with given exit parameters for the computation of supersonic flows
Analysis on the performance of a hypersonic inward turning inlet with three combined channels
A new understanding of hypersonic inlets' startability criterion
Integration waverider design of hypersonic inlet and forebody with preassigned pressure distribution
Numerical simulation of nacelle's effects on propeller slipstream based on IDDES model
Effects of incoming boundary layer on injection characteristics of a scramjet combustor
An inverse method for supersonic flowfield with given downstream boundary
An innovative integration concept for forebody and two-dimensional hypersonic inlet with controllable wall pressure distribution
Flow distortion generation and management of an axisymmetric ramjet engine
Integration methodology for waverider-derived hypersonic inlet and vehicle forebody
Injection and mixing in a scramjet combustor: Des and RANS studies
Evaluation of Turbulence Models in Predicting Hypersonic and Subsonic Base Flows Using Grid Adaptation Techniques
Application of the γ-Reθt transition model in high speed flows
真实气体效应下前体/进气道一体化模型气动特性研究
推进技术,1001-4055,2024-12-17.考虑巡航攻角的三维内转进气道设计与分析
航空学报,1000-6893,2024-12-02.高超声速三维内转进气道研究进展综述
航空学报,1000-6893,2024-12-02.基于门控扩散模型的飞行器气动性能预测与反设计研究
航空学报,1000-6893,2024-12-02.高超声速带奇性轴外形热流准确预示的混合算法研究与应用
南京航空航天大学学报,1005-2615,2024-08-15.侧滑角对V型钝化唇口激波干扰结构影响研究
航空学报,1000-6893,2024-06-30.基于深度学习的风力机叶片气动优化方法研究
应用力学学报,1000-4939,2024-06-28.三维弯曲流面法及其在外流乘波体中的应用
航空学报,1000-6893,2024-06-19.基于域对抗神经网络的双模态燃烧室跨构型燃烧模态识别
推进技术,1001-4055,2024-05-06.不同Ma∞、Re下双楔定常/非定常流动的模拟分析与流态预测
北京航空航天大学学报,1001-5965,2024-04-17.考虑平衡气体效应的乘波体特征线设计方法及气体模型影响
南京航空航天大学学报,1005-2615,2024-02-15.基于深度学习的高速直升机旋翼翼型气动优化设计
航空学报,1000-6893,2024-01-05.一种弯曲激波诱导爆震的起爆新方式
航空学报,1000-6893,2023-12-04.基于局部偏转吻切方法的背部进气高超飞行器一体化设计研究
空天技术,2097-0714,2023-10-15.不同气体模型与滑移边界模型下升力体摩阻热流预示研究
北京航空航天大学学报,1001-5965,2023-08-30.膨胀波对斜劈稳定斜爆震波特性影响的数值研究
推进技术,1001-4055,2023-06-02.膨胀波对斜劈稳定斜爆震波特性影响的数值研究
推进技术,1001-4055,2023-06-02.基于三维弯曲激波的宽域变马赫数乘波体设计分析
南京航空航天大学学报,1005-2615,2022-10-15.圆锥激波与平板边界层干扰的数值模拟研究
南京航空航天大学学报,1005-2615,2022-08-15.面向高超民机的多通道双涡轮引射冲压组合动力研究
航空学报,1000-6893,2022-06-21.面向高超声速民机的多通道双涡轮引射冲压组合动力
航空学报,1000-6893,2022-06-21.高温高压进口下甲烷/氧气旋转爆震燃烧室增压特性与流场分析
推进技术,1001-4055,2022-04-13.高温高压进口下甲烷/氧气旋转爆震燃烧室增压特性与流场分析
推进技术,1001-4055,2022-04-13.基于局部偏转吻切方法的多级压缩乘波体设计
力学学报,0459-1879,2022-03-18.基于航迹优化的变几何冲压发动机控制规律设计方法
推进技术,1001-4055,2022-02-22.XTER内收缩组合进气道设计理念及气动特性
空气动力学学报,0258-1825,2022-02-15.二维弯曲激波/湍流边界层干扰流动理论建模
航空学报,1000-6893,2021-09-24.基于分段高斯伪谱法的组合动力飞行器火箭挂飞轨迹规划
航天控制,1006-3242,2021-08-15.级间旋转爆震涡轴发动机热力过程及性能分析
推进技术,1001-4055,2021-07-14.无人机飞行有效载荷计算与载荷平台研究
航空工程进展,1674-8190,2021-02-04.无人机飞行载荷计算与载荷平台研究
航空工程进展,1674-8190,2021-02-04.涡轮基组合动力与火箭的耦合特性分析及匹配优化设计
航空学报,1000-6893,2021-01-11.圆盘旋转爆震燃烧室中爆震波传播模态
推进技术,1001-4055,2020-12-04.双模块下颌式内转进气道/圆锥前体一体化布局研究
推进技术,1001-4055,2020-10-21.通用的插值补充格子Boltzmann方法应用于计算气动声学
浙江大学学报(工学版),1008-973X,2020-08-06.转级模式对三维内转组合进气道模态转换性能的影响分析
推进技术,1001-4055,2020-06-30.旋转爆震发动机喷管非定常流动特性的数值模拟研究
推进技术,1001-4055,2020-03-24.基于增益矩阵的二阶集群系统鲁棒分布式立体编队控制
中国科学:技术科学,1674-7259,2020-02-22.新一代绿色超声速民机的发展现状与挑战
科学通报,0023-074X,2020-01-30.幂律型流体撞击射流破碎特性直接数值模拟
推进技术,1001-4055,2019-12-18.剪切层形态对声波传播与声源定位的影响研究
西北工业大学学报,1000-2758,2019-12-15.曲锥前体/内转进气道一体化设计与试验研究
实验流体力学,1672-9897,2019-10-15.一种涡轮基组合动力的整机低速风洞试验研究
推进技术,1001-4055,2019-06-11.基于DMD方法的超声速进气道喘振特性分析
航空动力学报,1000-8055,2019-05-07.高压环境下剪切稀化非牛顿撞击射流直接数值模拟
航空学报,1000-6893,2019-03-04.曲锥前体/三维内转进气道一体化设计与分析
航空动力学报,1000-8055,2018.高超声速进气道的裂解碳氢燃料提前喷注研究
推进技术,1001-4055,2018.飞秒激光螺旋加工小孔几何参数演化实验研究
中国激光,0258-7025,2018.乘波前体三维内转进气道气动融合设计
推进技术,1001-4055,2018.欧洲典型再入飞行测试技术分析
推进技术,1001-4055,2018.剪切稀化非牛顿射流撞击液膜破碎直接数值模拟
航空学报,1000-6893,2018.桨尖开孔参数对旋翼流场特性的影响研究
西北工业大学学报,1000-2758,2018.基于密切原理的Bump进气道外压缩鼓包逆向设计
航空动力学报,1000-8055,2018.低韦伯数非牛顿射流撞击破碎直接数值模拟
航空学报,1000-6893,2017-08-25.超声速流场的流线-特征线坐标变换与应用
推进技术,1001-4055,2017-05-01.航空发动机进气温度畸变研究综述
南京航空航天大学学报,1005-2615,2017.高超声速进气道起动问题的理论判据新认识
推进技术,1001-4055,2016-10-12.考虑来流边界层的超燃燃烧室喷射特性
航空动力学报,1000-8055,2016-06-08.给定下游边界的超声速流场逆向求解方法
推进技术,1001-4055,2016-03-29.压力分布可控的高超声速进气道/前体一体化乘波设计
航空学报,1000-6893,2016-02-23.横向气流中非牛顿液体射流直接数值模拟
航空学报,1000-6893,2016-01-31.短舱对螺旋桨滑流影响的IDDES数值模拟
航空学报,1000-6893,2016-01-25.基于弯曲激波流场的内外流双乘波一体化设计及分析
推进技术,1001-4055,2025-03-20.当量比非均匀情况下的飞行攻角对斜爆震流动特征影响研究
推进技术,1001-4055,2025-01-16.引射火箭启动过程的进气道动态特性仿真研究
气动研究与试验,2097-258X,2024-03-10.直升机旋翼下洗流对涡轴发动机进气道的影响数值模拟研究
气动研究与试验,2097-258X,2024-03-10.COVID-19疫情下高等院校科技创新变革与担当
高教学刊,2096-000X,2023-02-08.斜激波与轴对称边界层干扰的数值模拟
气体物理,2096-1642,2023-01-15.基于弯曲激波特征线法的两级压缩内收缩流场设计与分析
气体物理,2096-1642,2022-05-27.基于弯曲激波特征线法的两级压缩内收缩流场设计与分析
气体物理,2096-1642,2022-05-27.高阶弯曲激波理论及其典型应用研究
空天技术,2097-0714,2022-02-28.轴对称内锥流动中马赫盘的形成与演化
空气动力学学报,,2021-12-20.跨音速轴向压气机叶尖间隙流动模拟的湍流模型适用性分析
第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛论文集(第一册),,2021-12-14.基于非轴对称吻切技术的三维激波逆向乘波设计
航空科学技术,1007-5453,2020-11-25.三维内转TBCC进气道模态转换过程流动分析
第五届空天动力联合会议暨中国航天第三专业信息网第41届技术交流会论文集(第一册),,2020-09-16.航空工程创新人才“学-赛-研-创”培养模式的探究与实践——以厦门大学航空航天学院为例
高等教育研究学报,1672-8874,2020-06-15.高超声速飞行器一体化方法研究
航空发动机,1672-3147,2019-12-15.三维内转组合进气道模态转换过程流动分析
中国航天第三专业信息网第四十届技术交流会暨第四届空天动力联合会议论文集——S03冲压及组合推进技术,,2019-08-14.叶片气膜孔加工与测量技术的现状及发展趋势
航空制造技术,1671-833X,2018-7-1.叶片气膜孔加工与测量技术的现状及发展趋势*
航空制造技术,1671-833X,2018.麻省理工学院创新型人才的培养模式与启示
高等教育研究学报,1672-8874,2018.椭圆形超燃燃烧室内燃料喷射和掺混性能研究
推进技术,10014055,2017-03-01.高超声速乘波前体/三维内转进气道逆向设计
2016年航空科学与技术全国博士生学术论坛摘要集,,2016-11-25.高超声速进气道的裂解碳氢燃料提前喷注
第九届全国流体力学学术会议论文摘要集,,2016-10-20.Ma1.8时BUMP进气道激波振荡特性的脱体涡模拟
2016海峡两岸流体力学研讨会论文摘要集,,2016-09-04.剪切稀化流体的撞击破碎数值分析
2016海峡两岸流体力学研讨会论文摘要集,,2016-09-04.非牛顿撞击射流破碎的直接数值模拟
中国航天第三专业信息网第三十七届技术交流会暨第一届空天动力联合会议论文集,,2016-08-17.厦门大学航空系的“前世今生”——絮语厦门大学航空航天学院成立
厦门科技,1007-1563,2015-04-25.欧洲的高超声速推进项目及其项目管理
燃气涡轮试验与研究,1672-2620,2013-12-15.逆向泄流槽在三维内乘波式进气道中的应用
燃气涡轮试验与研究,1672-2620,2013-12-15.