已发表成果:
WOK 论文 41 篇;中文核心 19 篇;其它论文 17 篇;专利发明 51 个;
A lightweight and accurate recognition algorithm of pointer meter based on improved Deeplabv3+for inspection robots
A high-sensitive anisotropic magnetoresistive sensor based on hybrid Ta/NiFe/Ta/Al multilayer structure
Preparation of organohydrogel EMG electrodes and their application in dynamic gesture recognition
Resolution-sensitive self-supervised monocular absolute depth estimation
An Improved Supervoxel Clustering Algorithm of 3D Point Clouds for the Localization of Industrial Robots
A Threshold Extend Kalman Filter Algorithm for State of Charge Estimation of Lithium-Ion Batteries in Electric Vehicles
A pointer meter reading recognition method based on improved ORB algorithm for substation inspection robot
Hybrid fiber optic sensor, based on the Fabry–Perot interference, assisted with fluorescent material for the simultaneous measurement of temperature and pressure
The Regulation Characteristics of Bridge Modular Switched-Capacitor Ac-Ac Converter
Single-Phase Safe-Commutation Trans-Z-Source AC-AC Converter with Continuous Input Current
A Bidirectional Bridge Modular Switched-Capacitor-Based Power Electronics Transformer
Graphene-Ag Hybrids on Laser-Textured Si Surface for SERS Detection
Laser-assisted chemical vapor deposition setup for fast synthesis of graphene patterns
Hybrid functional studies on the optical and electronic properties of graphane and silicane
Analysis on the structure of the TMT's atmospheric dispersion corrector
Grating exchange system of independent mirror supported by floating rotary stage
An evaluation method of a micro-arrayed multispectral filter mosaic
Design of micro-arrayed multichannel optical filter for multispectral colposcope
Application of remote sensing on monitoring of forest fire
Study on physical activity energy consumption meter based on MEMS accelerometer
Design of quality inspection and storage system of infrared receiver based on FPGA
Automatic ball-pressure indentation testing system based on image processing technology
Analysis of confocal readout signal in multilayer optical storage with vector diffraction theory
Nonlinear modeling of piezoelectric actuator based on SVR
Miniaturized broad-banded luminous source with fiber output for spectrophotometer
Ultra-precise micro-motion stage for optical scanning test
Study on the MEMS technique of flat capacitance sensor with double equipotential rings in ultra-precise optical measurement
Analysis on the performance of differential confocal pointing signal
Application of the Pockels effect to electric current measurement
Computer calculation and simulation in confocal multi-layer optic storage
Development of double equipotential ring capacitance sensor in ultra-precis E optical measurement
Critical bending optical fiber sensor with serial structure for feedback control of flexible hinge stage
A dynamic feature extraction based on wavelet transforms for speaker recognition
Effect of Gaussian source on differential confocal microscopy pointing signal
Application of the pockels effect to high voltage measurement
Modeling and analysis of the mathematic model of differential astigmatic optical system used for FPC (flexible printed circuit) online detection system
Effect of coupling effectiveness on fiber optical probe
Analysis of structure and control of the loop-locked ultra-precise 2D flexible hinge stage for optical measurement
Effect of tilt angle of surface to be measured on differential confocal microscope pointing signal
High-precise double equipotential ring capacitance sensor for optical measurement
Differential astigmatic detecting system for discontinuous surface measurement
有机凝胶肌电电极制备及其在动态手势识别的应用
中南大学学报(自然科学版),1672-7207,2024-06-26.户外巡检机器人指针式仪表识别方法研究
仪表技术与传感器,1002-1841,2023-11-25.基于手持式深度相机的包裹体积测量方法
厦门大学学报(自然科学版),0438-0479,2023-07-28.基于YOLOv4-tiny和Hourglass的指针式仪表读数识别
电子测量与仪器学报,1000-7105,2023-03-28.石墨烯/光波导集成的非对称场效应结构特性研究
电子元件与材料,1001-2028,2021-03-05.基于电动汽车创新技术应用的碳减排潜力分析
科技管理研究,1000-7695,2020-10-10.基于多参数融合的铅酸蓄电池SOC估算方法研究
电源技术,1002-087X,2018.激光化学气相沉积石墨烯聚焦光斑测量研究
激光与红外,1001-5078,2017.基于交通信息影响下的电动汽车充电路径规划
计算机应用,1001-9081,2016-12-15.激光直写制备石墨烯研究进展
化工新型材料,1006-3536,2015-12-15.激光化学气相沉积石墨烯的基底温度场仿真
激光技术,1001-3806,2015-09-25.微型化多通道滤光片光谱串扰模型的建立和评价
光学技术,1002-1582,2013-11-15.超声相控阵探头声场优化设计仿真
厦门大学学报(自然科学版),0438-0479,2013-05-28.基于蓝牙4.0模块的直升机航模控制系统
厦门大学学报(自然科学版),0438-0479,2013-03-28.多光谱阴道镜的微型化多通道滤光片设计
光学精密工程,1004-924X,2012.压电陶瓷动态驱动电源研究
厦门大学学报(自然科学版),0438-0479,2010.一种摩托车部件集成焊接系统的开发研究
组合机床与自动化加工技术,1001-2265,2007-05-20.基于臭氧/紫外线法的石化污水深度处理
厦门大学学报(自然科学版),0438-0479,2007-05-15.测量表面倾角对差动共焦瞄准信号影响分析
光学学报,0253-2239,2006-09-30.智能电表运行状态评估技术研究综述
电测与仪表,1001-1390,2019-11-04.深度学习在电力负荷预测中的应用
自动化仪表,1000-0380,2019-08-20.提高共焦拉曼光谱成像系统分辨率的技术分析
激光杂志,0253-2743,2018.串联石墨烯与光波导复合结构的分光与光电转换一体器件特性研究
光电子技术,1005-488X,2017.上下眼睑反相滚压及包络运动的睑板腺按摩机构
中国医疗器械杂志,1671-7104,2014-07-31.碳纤维实现睑板腺按摩仪柔性气囊热敷技术研究
中国医疗器械信息,1006-6586,2014-05-25.基于DDS技术的超声相控阵发射系统研究
机电技术,1672-4801,2013-04-30.石墨烯可调谐红外分光光电转换集成器件研究
微纳电子技术,1671-4776,2013-01-15.微型、超轻型中低空多光谱遥感设备
机电技术,1672-4801,2012.基于ADAMS平台整车建模与仿真
机电技术,1672-4801,2011.基于Qtopia的嵌入式中文输入法设计
现代电子技术,1004-373X,2010.微位移检测系统中精密光电转换电路设计
机械工程师,1002-2333,2010.测量光路中调焦音圈电机特性的仿真分析
机械工程师 ,1002-2333 ,2009.基于FPGA的红外接收头质量检测系统设计
自动化与仪器仪表 ,1001-9227 ,2009.突出“实践”特色 建设工程光学精品课程
高等理科教育 ,1000-4076 ,2009.球压试验压痕尺寸的测量技术现状及发展趋势
机电技术 ,1672-4801 ,2009.手摇式折叠式过床器的设计
机械,1006-0316,2007-11-25.一种快速制备大面积石墨烯/金属复合结构表面增强拉曼散射基底的方法
CN107037032A,2017-08-11.