Rational design of carbon skeleton interfaces for highly reversible sodium metal battery anodes

A composite material consisting of tin nanospheres anchored on and embedded in carbon nanofibers for outstanding sodium-ion storage

Enhancing catalytic isomerization ability of SAPO-11 by typical acid modification in preparation of green diesel by one-step hydrotreatment of FAME

Flexible carbon nanofibers with multichannel and porous structure as freestanding anode for excellent sodium storage

Efficient and stable Fe-Ce-Al catalyst for catalytic deoxygenation of lignin for phenol and hydrocarbon-rich fuel: Effect of the synthesis method

Heterogeneous La and CeOx co-promoted SAPO-11 catalyst for catalytic upgrading of cellulose-derived volatile and methanol into hydrocarbon-rich fuels

General Method for Trimetallic Platinum-Cobalt-Rare Earth Alloys on Nitrogen-Doped Carbon as Efficient Methanol Electrooxidation Catalysts

Synthesis of Ni/SAPO-11-X zeolites with graded secondary pore structure and its catalytic performance for hydrodeoxygenation-isomerization of FAME for green diesel production

Enhanced adsorption of phenol from aqueous solution by KOH combined Fe-Zn bimetallic oxide co-pyrolysis biochar: Fabrication, performance, and mechanism

Structural evolution of carbon foam and its effect on polypyrrole/carbon foam composite electrodes in supercapacitors

Green diesel-like hydrocarbon production by H2-free catalytic deoxygenation of oleic acid via Ni/MgO-Al2O3 catalysts: Effect of the metal loading amount

Influence of one-pot and two-step preparation on the quality of carbon nanotubes using pine sawdust as the catalyst support

Enhancing catalytic performance of red mud for palmitic acid hydrodeoxygenation by acid pretreatment-induced structural modification

Bamboo-derived nitrogen-doping magnetic porous hydrochar coactivated by K2FeO4 and CaCO3 for phenol removal: Governing factors and mechanisms

Novel porous CaO-MgO-promoting γ-Al2O3-catalyzed selective hydrogenation of oleic acid to green hydrocarbon fuels in biogasoline range with methanol as an internal hydrogen source

Bifunctional lithiophilic carbon fibers with hierarchical structure for high-energy lithium metal batteries

Preparation of nitrogen-containing compounds and nitrogen-doped biochar via nitrogen-rich pyrolysis coupled with ammonia source impregnation

Catalytic conversion of cellulose to long-chain alkanes/furans without extra hydrogen via rational design of Au nanoparticle on TS-1

Increased high selectivity light aromatics and furans production by co-feeding methanol to catalytic pyrolysis of cellulose with Lanthanum-Cerium bimetallic modified MCM-41 catalysts

Insight into the synergistic reaction mechanism of biomass pseudocomponents and polyamide by TG-MS and Py-GC/MS: Pyrolysis properties, reaction kinetics and N-containing species evolution

Production of hydrocarbon-rich bio-oil by catalytic biomass pyrolysis over metal oxide improved P/HZSM-5 catalyst

Highly stable Mo-based bimetallic catalysts for selective deoxygenation of oleic acid to fuel-like hydrocarbons

Homogenous metallic deposition regulated by abundant lithiophilic sites in nickel/cobalt oxides nanoneedle arrays for lithium metal batteries

Enhancing hydrodeoxygenation-isomerization of FAME over M-SAPO-11 in one-step process: Effect of in-situ isomorphic substitution of transition metals and synergy of PtxSny alloy

Carboxymethylcellulose reinforced starch films and rapid detection of spoiled beverages

In-situ and ex-situ catalytic pyrolysis of cellulose to produce furans over red mud-supported transition metal catalysts

Recovery of high-purity-4-chloroguaiacol from bleaching wastewater by a heterogeneous extraction method

Rationally control the path of hydrodeoxygenation of palmitic acid over Ni/ red-mud catalysts by surface decoration of oxophilic MoOx species

Ion-Modified Starch Film Enables Rapid Detection of Spoiled Fruit Juices

Rational design of freestanding and high-performance thick electrode from carbon foam modified with polypyrrole/polydopamine for supercapacitors

Lignin-derived carbon membrane for the preparation of composite electrodes and applications in supercapacitors

Two-step strategy for the comprehensive utilization of tobacco stem

One-step fabrication of N-doped activated carbon by NH3 activation coupled with air oxidation for supercapacitor and CO2 capture applications

Multi-channel rod structure hard carbon for high initial Coulombic efficiency and low-potential sodium storage br

Feasibility analysis of extracting and purifying 4-ethylguaiacol using the intermediate product of the reaction between 4-ethylguaiacol and Ca2+ as the extracting agent

Influence of different radial distribution zones of Douglas fir trunk as precursors on the properties of prepared activated carbons

Hard carbon derived for lignin with robust and low-potential sodium ion storage

Calcination temperature induced structural change of red mud and its enhanced catalytic performance for hydrocarbon-based biofuels production

Carbon/Lithium Composite Anode for Advanced Lithium Metal Batteries: Design, Progress, In Situ Characterization, and Perspectives

Effect of preparation method of NiMo/?-Al2O3 on the FAME hydrotreatment to produce C-15-C-18 alkanes

Ammonia (NH3)/nitrogen (N2) torrefaction pretreatment of waste biomass for the production of renewable nitrogen-containing chemicals via catalytic ammonization pyrolysis: Evolution of fuel-N under a N2/ NH3-rich atmosphere

Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste ex-situ catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst

Synthesis of Pt-based TS-1 catalysts for selective hydrogenation to produce C-15-C-18 alkanes from the FAME: Effect of rare-earth metal additives

Feasibility Analysis of Extracting and Purifying 4-Ethylguaiacol Using the Intermediate Product of the Reaction between 4-Ethylguaiacol and Ca2+ as the Extracting Agent

Selective conversion of lignocellulosic biomass and its components into value-added furans over Al-based bimetals: Analytical Py-GC x GC/MS

Boosting production of useful chemicals and micro-mesopores biochar from in situ catalytic pyrolysis of cellulose with red mud

Nb2O5 modified NiAl2O4 catalysts for hydrodeoxygenation of methyl palmitate to long-chain alkane

Rational Design of Freestanding and High-Performance Thick Electrode from Carbon Foam Modified with Polypyrrole/Polydopamine for Supercapacitors

Selective production of alkanes and fatty alcohol via hydrodeoxygenation of palmitic acid over red mud-supported nickel catalysts

NiCo2O4 with unique 3D miniature sea urchins as binder-free electrode for high performance asymmetric supercapacitor

Optimization of key parameters using RSM for improving the production of the green biodiesel from FAME by hydrotreatment over Pt/SAPO-11

Gradient lithiation to load controllable, high utilization lithium in graphitic carbon host for high-energy batteries

A novel perspective on interfacial interactions between polypyrrole and carbon materials for improving performance of supercapacitors

Conversion of higher fatty acids or higher fatty acid esters to long-chain alkanes by acid added metal catalyst under mild hydrothermal conditions

One-Dimensional Spinel Transition Bimetallic Oxide Composite Carbon Nanofibers (CoFe2O4@CNFs) for Asymmetric Supercapacitors

Battery-type MnCo2O4@carbon nanofibers composites with mesoporous structure for high performance asymmetric supercapacitor

Conversion of chitin biomass into 5-hydroxymethylfurfural: A review

Boosting the selectivity of aromatic hydrocarbons via ex-situ catalytic fast pyrolysis of cellulose over Pt-Sn-Ce/gamma-Al2O3 catalyst

Direct catalytic conversion cellulose pyrolysis vapors into long chain alkanes (LCAs) over Au/TS-1

Insights into pyrolysis behavior of polyacrylonitrile precursors using Py-GC/MS

Insight into the KOH/KMnO4 activation mechanism of oxygen-enriched hierarchical porous biochar derived from biomass waste by in-situ pyrolysis for methylene blue enhanced adsorption

Activity and selectivity of Ni-Cu bimetallic zeolites catalysts on biomass conversion for bio-aromatic and bio-phenols

One-step hydrotreatment of inedible oil for production the second-generation biofuel over Pt-Sn/SAPO-11 catalyst

Catalytic upgrading of lignocellulosic biomass pyrolysis vapors: Insights into physicochemical changes in ZSM-5

Production of diesel-like hydrocarbons via hydrodeoxygenation of palmitic acid over Ni/TS-1 catalyst

Improving the Thermal and Mechanical Properties of Phenolic Fiber over Boron Modified High-Ortho Phenolic Resin

Reagent-assisted hydrothermal synthesis of NiCo2O4 nanomaterials as electrodes for high-performance asymmetric supercapacitors

Ex-situ catalytic upgrading of corncob pyrolysis vapors into furans and phenols over Pt-Re/AC: Effect of Pt/Re ratio and process parameter

Production of bio-aromatic by catalytic biomass pyrolysis over metal modified biomass-derived biochar-based catalyst

Current challenges and innovative developments in pretreatment of lignocellulosic residues for biofuel production: A review

Preparation of Anisole in Phenol by Zn/HZSM-5 Catalyst from Walnut Shell Catalyzed Liquefaction

Development of a New Route for Separating and Purifying 4-Ethyl-2-methoxyphenol Based on the Reaction Mechanism between the Chemical and Calcium Ion

Facile Preparation of Low-Cost and Cross-Linked Carbon Nanofibers Derived from PAN/PMMA/Lignin as Supercapacitor Electrodes

Preparation of high molecular weight thermoplastic bio-based phenolic resin and fiber based on lignin liquefaction

Selective Hydrogenation of Furfural over the Co-Based Catalyst: A Subtle Synergy with Ni and Zn Dopants

Highly efficient catalytic pyrolysis of biomass vapors upgraded into jet fuel range hydrocarbon-rich bio-oil over a bimetallic Pt-Ni/gamma-Al2O3 catalyst

Enhancing Lithium-Storage Performance via Graphdiyne/Graphene Interface by Self-Supporting Framework Synthesized

A novel purification method of activated carbon-supported carbon nanotubes using a mixture of Ca(OH)(2) and KOH as the ablation agent

Efficient ex-situ catalytic upgrading of biomass pyrolysis vapors to produce methylfurans and phenol over bio-based activated carbon

A new method for long-chain alkanes under a condition without extra hydrogen source: Catalytic upgrading of cellulose pyrolysis vapors over Au/TS-1 catalyst

Upgrading agricultural biomass for sustainable energy storage: Bioprocessing, electrochemistry, mechanism

Preparation of aromatic and bio-char by pyrolysis of biomass and plastics catalyzed by modified HZSM-5

Bi-Doped Ceria as a Highly Efficient Catalyst for Soot Combustion: Improved Mobility of Lattice Oxygen in CexBi1-xOy Catalysts

Catalytic fast pyrolysis of cellulose over Ce0.8Zr0.2-xAlxO2 catalysts to produce aromatic hydrocarbons: Analytical Py-GC x GC/MS

Preparation of micron Si@C anodes for lithium ion battery by recycling the lamellar submicron silicon in the kerf slurry waste from photovoltaic industry

Efficient and stable Ni-Cu catalysts for ex situ catalytic pyrolysis vapor upgrading of oleic acid into hydrocarbon: Effect of catalyst support, process parameters and Ni-to-Cu mixed ratio

Catalytic copyrolysis of metal impregnated biomass and plastic with Ni-based HZSM-5 catalyst: Synergistic effects, kinetics and product distribution

Analysis of Ce-Zr-Al-O catalyst for pyrolysis of tobacco stem

Selectivity catalytic depolymerization of the hydrolyzed lignin to produce phenolic chemicals over nickel phosphides supported on HZSM-5 catalysts

Synthesis and Thermal Properties of Resorcinol-Furfural Thermosetting Resin

Coupling catalytic co-pyrolysis of bio-derived furans and methanol for enhancing aromatic production over HZSM-5 catalyst

Optimizing Ni-Ce/HZSM-5 catalysts for ex-situ conversion of pine wood pyrolytic vapours into light aromatics and phenolic compounds

Enhancing the aromatic hydrocarbon yield from the catalytic copyrolysis of xylan and LDPE with a dual-catalytic-stage combined CaO/HZSM-5 catalyst

Vertically Transported Graphene Oxide for High-Performance Osmotic Energy Conversion

Catalytic upgrading of xylan-based hemicellulose pyrolysis vapors over activated carbon supported Pt-based bimetallic catalysts to increase furans: Analytical Py-GC x GC/MS

A Surface Chemistry Approach to Tailoring the Hydrophilicity and Lithiophilicity of Carbon Films for Hosting High-Performance Lithium Metal Anodes

Catalytic Pyrolysis Vapor Upgrading of Corncob into Furans over Pyrolysis-Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry: Significance of Catalyst and Temperature

Catalytic pyrolysis of cellulose over solid acidic catalysts: an environment-friendly method for furan production

Nitrogen reduction to ammonia at ambient conditions using hydrochar prepared from cigarette filters as catalyst

Selective conversion of lignocellulosic biomass into furan compounds using bimetal-modified bio-based activated carbon: Analytical Py-GC x GC/MS

Catalytic co-pyrolysis of Yunnan pine and hydrogen donor over desilicated ZSM-5 for light aromatics

Enhanced low temperature catalytic activity of Ni/Al-Ce0.8Zr0.2O2 for hydrogen production from ammonia decomposition

Optimization of process for preparation of furan compounds by pyrolysis catalytic conversion of corncob

Flexible lignin carbon membranes with surface ozonolysis to host lean lithium metal anodes for nickel-rich layered oxide batteries

Chemical-enzymatic fractionation to unlock the potential of biomass-derived carbon materials for sodium ion batteries

Understanding the critical chemistry to inhibit lithium consumption in lean lithium metal composite anodes