A novel trimethylsilyl 2-(fluorosulfonyl)difluoroacetate additive for stabilizing the Ni-rich LiNi0.9Co0.05Mn0.05O2/electrolyte interface

Tailoring the redox-active transition metal content to enhance cycling stability in cation-disordered rock-salt oxides

Fluorinated cyclic siloxane additives for high energy density Li-ion batteries with high nickel cathodes and silicon-carbon anodes

Quantitatively analyzing the failure processes of rechargeable Li metal batteries

Research Progresses of Sodium Cobalt Oxide as Cathode in Sodium Ion Batteries

Understanding the effect of Nb substitution on Li-Mn-rich layered oxides

In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes

All solid thick oxide cathodes based on low temperature sintering for high energy solid batteries

Insights of the Electrochemical Reversibility of P2-Type Sodium Manganese Oxide Cathodes via Modulation of Transition Metal Vacancies

Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries

State of health (SoH) estimation and degradation modes analysis of pouch NMC532/graphite Li-ion battery

Lithium Host:Advanced architecture components for lithium metal anode

Reversible Multi-Electron Storage Enabled by Na5V(PO4)(2)F-2 for Rechargeable Magnesium Batteries

Initial Stages of Oxidation Reactions of Ethylene Carbonate and Fluoroethylene Carbonate on LixCoO2 Surfaces: A DFT Study

Modification and regulation of electrode/electrolyte interface for high specific energy and long life lithium ion batteries

Quantifying the reaction mechanisms of a high-capacity CuP2/C composite anode for potassium ion batteries

Kinetics of lithium dendrite growth in garnet-type solid electrolyte

Revealing the correlation between structure evolution and electrochemical performance of high-voltage lithium cobalt oxide

Bulk boron doping and surface carbon coating enabling fast-charging and stable Si anodes: from thin film to thick Si electrodes

Neutron Depth Profiling Technique for Studying Rechargeable Lithium Metal Anodes

Pillar-beam structures prevent layered cathode materials from destructive phase transitions

Counter-Intuitive Structural Instability Aroused by Transition Metal Migration in Polyanionic Sodium Ion Host

Electrochemo-Mechanical Effects on Structural Integrity of Ni-Rich Cathodes with Different Microstructures in All Solid-State Batteries

Fluorinated graphite nanosheets for ultrahigh-capacity lithium primary batteries

Solid-State NMR and MRI Spectroscopy for Li/Na Batteries: Materials, Interface, and In Situ Characterization

Interfacial compatibility issues in rechargeable solid-state lithium metal batteries: a review

Stabilizing Ni-Rich LiNi0.83Co0.12Mn0.05O2 with Cyclopentyl Isocyanate as a Novel Electrolyte Additive

Enhanced Cycle Life and Rate Capability of Single-Crystal, Ni-Rich LiNi0.9Co0.05Mn0.05O2 Enabled by 1,2,4-1H-Triazole Additive

Uniformity of Flat Li-Ion Batteries Studied by Diffraction and Imaging of X-rays and Neutrons

O3-Type NaCrO2 as a Superior Cathode Material for Sodium/Potassium-Ion Batteries Ensured by High Structural Reversibility

Origin of High Ionic Conductivity of Sc-Doped Sodium-Rich NASICON Solid-State Electrolytes

CHAPTER 1: NMR Principles of Paramagnetic Materials

CHAPTER 7: Intercalation and Alloying Anode Materials for Rechargeable Li/Na Batteries

CHAPTER 5: Oxide-based Cathode Materials for Li- And Na-ion Batteries

CHAPTER 9: NMR Studies of Oxide-type Solid State Electrolytes in All Solid State Batteries

Unravelling the Fast Alkali-Ion Dynamics in Paramagnetic Battery Materials Combined with NMR and Deep-Potential Molecular Dynamics Simulation

Insight into Ion Diffusion Dynamics/Mechanisms and Electronic Structure of Highly Conductive Sodium-Rich Na(3+x)LaxZr(2)-xSi(2)PO(12) (0 <= x <= 0.5) Solid-State Electrolytes

Compatibility of Various Electrolytes with Cation Disordered Rocksalt Cathodes in Lithium Ion Batteries

Electrolyte Additive cis-1,2,3,6-Tetrahydrophthalic Anhydride Enhanced the Cycle Life of Nickel-Rich LiNi0.9Co0.05Mn0.05O2

Stabilizing the LiCoO2 Interface at High Voltage with an Electrolyte Additive 2,4,6-Tris(4-fluorophenyl)boroxin

Constructing a High-Energy and Durable Single-Crystal NCM811 Cathode for All-Solid-State Batteries by a Surface Engineering Strategy

Interfacial Enhancement of Silicon-Based Anode by a Lactam-Type Electrolyte Additive

Enhancing the Reduction Kinetics of Li-SF6 Batteries by Dispersed Cobalt Phthalocyanines on Porous Carbon

Linking the Defects to the Formation and Growth of Li Dendrite in All-Solid-State Batteries

Substantially Promoted Energy Density of Li parallel to CFx Primary Battery Enabled by Li+-DMP Coordinated Structure

Formulating a New Electrolyte: Synergy between Low-Polar and Non-polar Solvents in Tailoring the Solid Electrolyte Interface for the Silicon Anode

Boosting the Energy Density of Li parallel to CFx Primary Batteries Using a 1,3-Dimethyl-2-imidazolidinone-Based Electrolyte

Enhanced Interfacial Stability of a LiNi0.9Co0.05Mn0.05O2 Cathode by a Diboron Additive

Mechanistic Probing of Encapsulation and Confined Growth of Lithium Crystals in Carbonaceous Nanotubes