Tunable band gap in half-fluorinated bilayer graphene under biaxial strains

A novel Li(2)FeSiO(4)/C composite: Synthesis, characterization and high storage capacity

Titanium phosphates as positive electrode in lithium-ion batteries: composition, phase purity and electrochemical performance

Silicon nanowires coated with copper layer as anode materials for lithium-ion batteries

FTIR characterization of ion association and phase composition in PEO-based polymer electrolytes

Recent advances in the research of polyanion-type cathode materials for Li-ion batteries

Highly crystalline macroporous beta-MnO2: Hydrothermal synthesis and application in lithium battery

Hydrothermal Synthesis of a Nanosized LiNi0.5Mn1.5O4 Cathode Material for High Power Lithium-Ion Batteries

Preparation, characterization and electrochemical performance of LiNi0.4Co0.2Mn0.4O2 as cathode materials in lithium ion battery

A novel inorganic/organic composite membrane tailored by various organic silane coupling agents for use in direct methanol fuel cells

Methanol-Blocking Perfluorosulfonic Acid Composite Membranes in Direct Methanol Fuel Cells

Structural Characterization and Electrochemical Performance of AIF(3)-coated LiNi0.45Mn0.45Co0.10O2 as Cathode Materials for Lithium Ion Batteries

The effects of sintering temperature and time on the structure and electrochemical performance of LiNi0.8Co0.2O2 cathode materials derived from sol-gel method

First-principles calculation on the formation energies of lithium insertion in InSb

Ab initio calculation of the formation energies of lithium substitutions in InSb

Ab initio calculation of the voltage profile curve of Li insertions in InSb

Poly(2,5-dihydroxy-1,4-benzoquinonyl sulfide) (PDBS) as a cathode material for lithium ion batteries

In-situ and ex-situ characterization of surface oxide films on AB(5)-type metal hydride electrodes

Effects of radio-frequency sputtering powers on the microstructures and electrochemical properties of LiCoO2 thin film electrodes

Synthesis, characterization and electrochemical performance of mesoporous FePO4 as cathode material for rechargeable lithium batteries

Progress in polyanion-type cathode materials for lithium ion batteries

Preparation and performance of spinel LiMn2O4 thin films - An EQCM technique study

Electrochemical performance of doped LiMn2O4 synthesized by used titanium doped electrolytic manganese dioxide

Synthesis of micro-nano hierarchical structured LiFePO(4)/C composite with both superior high-rate performance and high tap density

Prospects for detecting metal-adsorbate vibrations by sum-frequency spectroscopy

Sol-gel synthesis and electrochemical properties of fluorophosphates Na(2)Fe(1-x)Mn(x)PO(4)F/C (x=0, 0.1, 0.3, 0.7, 1) composite as cathode materials for lithium ion battery

Effect of Fluoroethylene Carbonate Additive on the Performance of Lithium Ion Battery

LOCAL PHOTOCURRENT CHARACTERISTICS OF LEAD-OXIDE FILMS IN ACID-SOLUTION AND AN OPTICAL STORAGE PHENOMENON

IN-SITU PHOTOELECTROCHEMICAL MICROSCOPIC STUDY OF PB/PBO/PBSO4 MULTIINTERFACE SYSTEM

Influences of electrode surface structure and organic additives on the electroreduction of fullerene

IN-SITU IR SPECTROSCOPIC CHARACTERIZATION OF SURFACE OXIDE SPECIES ON GLASSY-CARBON ELECTRODES

IN-SITU FTIR CHARACTERIZATION OF THE ELECTROOXIDATION OF GLASSY-CARBON ELECTRODES

Studies on surface properties of metal-hydride electrodes in Ni/MH batteries

HOMOGENEOUS AND HETEROGENEOUS CATALYTIC DECOMPOSITION OF HYDROGEN-PEROXIDE BY METALLOPORPHYRIN CARBON-BLACK IN ACID-SOLUTION

Electrochemical Behavior of Vinyl Ethylene Sulfite as an Electrolyte Film-forming Additive in Lithium Ion Batteries

Hydrothermal synthesis of LiMn2O4/C composite as a cathode for rechargeable lithium-ion battery with excellent rate capability

Structural properties and energetics of Li2FeSiO4 polymorphs and their delithiated products from first-principles

Recent Advances in Fluorophosphate and Orthosilicate Cathode Materials for Lithium Ion Batteries

Preparation and properties of MnO2/polyaniline composite

Preparation and electrochemical performance of doped LiNi1-xCoxO2 cathode materials

Progress in solid-state NMR studies of electrode materials for lithium ion batteries

Preparation of multi-walled carbon nanotube array electrodes and its electrochemical intercalation behavior of Li ions

A comparison of preparation method on the electrochemical performance of cathode material Li Li(0.2)Mn(0.54)Ni(0.13)Co(0.13) O(2) for lithium ion battery

First-principles studies on the structural and electronic properties of Li-ion battery cathode material CuF2

Preparation of organo-functionalized mesoporous zeolites supported phosphine-rhodium complex and their catalytic performance for hexene-1 hydroformylation

First-principles calculation of the vacancy formation energies in LiAl

Investigation of lithium insertion in anode material CuSn for lithium-ion batteries

Formation energies of lithium intercalations in AlSb, GaSb and InSb

Fluoroethylene Carbonate as an Electrolyte Additive for Improving the Performance of Mesocarbon Microbead Electrode

IN-SITU INFRARED REFLECTANCE SPECTROSCOPIC INVESTIGATION OF OXIDE ON THE SURFACE OF GLASSY CARBON ELECTRODE

IN-SITU CHARACTERIZATION AND MODIFICATION OF SURFACE OXIDE SPECIES AT GLASSY-CARBON ELECTRODES

LASER-SCANNING MICROAREA PHOTOVOLTAGE IMAGING OF CORROSION ON THE SURFACE OF COPPER

Preparation and performance of spinel LiMn2O4 thin film electrodes: An in-situ electrochemical quartz crystal microbalance (EQCM) study

SCANNED LASER SPOT PHOTOCURRENT RESPONSE STUDIES OF SURFACE MODIFICATIONS OF CDSE THIN-FILM ELECTRODES

Performance and characterization of novel electrocatalyst for oxygen reduction

In-situ photoelectrochemical and Raman microscopic characterization of passive films on iron-based electrodes

Progress in the study of solid/solid interface between lithium electrode and polymer electrolytes in lithium polymer batteries

An Approach to Probe Solid Electrolyte Interface on Si Anode by P-31 MAS NMR

Non-Destructive Monitoring of Charge-Discharge Cycles on Lithium Ion Batteries using Li-7 Stray-Field Imaging

Improved electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O-2 cathode material by fluorine incorporation

Enhanced electrochemical performance of fluorinated carbon nanotube as cathode for Li-O2 primary batteries

First-principles investigation on the lithium ion insertion/extraction in trirutile LixFeF3

Tris(hexafluoro-iso-propyl)phosphate as an SEI-Forming additive on improving the electrochemical performance of the Li[Li0.2Mn 0.56Ni0.16Co0.08]O2 cathode material

A strategy to improve cyclic performance of LiNi0.5Mn 1.5O4 in a wide voltage region by Ti-doping

Effects of Na substitution on Li ion migration in Li2CoSiO 4 cathode material

Insights into electrochemical performance of Li2FeSiO 4 from first-principles calculations

Synthesis and characterization of fluorinated carbon nanotubes for lithium primary batteries with high power density

Novel phosphamide additive to improve thermal stability of solid electrolyte interphase on graphite anode in lithium-ion batteries

Li[Li0.2Mn0.54Ni0.13Co0.13]O-2-LiMn1.5Ti0.5O4 composite cathodes with improved electrochemical performance for lithium ion batteries

Enhanced high temperature cycling performance of LiMn2O4/graphite cells with methylene methanedisulfonate (MMDS) as electrolyte additive and its acting mechanism

Yolk-shell ZnO-C microspheres with enhanced electrochemical performance as anode material for lithium ion batteries

Increased Capacity of LiNi1/3Co1/3Mn1/3O2-Li[Li1/3Mn2/3]O-2 Cathodes by MnOx-surface Modification for Lithium-Ion Batteries

Hybrid density functional investigations of Li2MSiO4 (M = Mn, Fe and Co) cathode materials

Improved lithium ion battery performance by mesoporous Co3O4 nanosheets grown on self-standing NiSix nanowires on nickel foam

Facilitated Li+ ion transfer across the water/1,2-dichloroethane interface by the solvation effect

Toward high capacity and stable manganese-spinel electrode materials: A case study of Ti-substituted system

The effects of N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl) imide-based electrolyte on the electrochemical performance of high capacity cathode material Li[Li0.2Mn0.54Ni0.13Co 0.13]O2

Synthesis of LiCoMnO4 via a sol-gel method and its application in high power LiCoMnO4/Li4Ti5O12 lithium-ion batteries

Nanostructured 0.8Li2FeSiO4/0.4Li2SiO 3/C composite cathode material with enhanced electrochemical performance for lithium-ion batteries

Injection velocity control using 2D model predictive iterative learning algorithm

Sol-gel synthesis of Li2CoPO4F/C nanocomposite as a high power cathode material for lithium ion batteries

Solid-state STRAFI NMR probe for material imaging of quadrupolar nuclei

Synthesis and characterization of in situ Fe2O 3-coated FeF3 cathode materials for rechargeable lithium batteries

Room temperature ionic liquid as electrolyte for lithium ion battery

Growth of hierarchical 3D mesoporous NiSix/NiCo 2O4 core/shell heterostructures on nickel foam for lithium-ion batteries

Exploiting Na2MnPO4F as a high-capacity and well-reversible cathode material for Na-ion batteries

Mesoporous ZnCo2O4 microspheres composed of ultrathin nanosheets cross-linked with metallic NiSix nanowires on Ni foam as anodes for lithium ion batteries

Electron tunneling based SEI formation model

Promoting long-term cycling performance of high-voltage Li 2CoPO4F by the stabilization of electrode/electrolyte interface

Effects of composition on electrochemical properties of a non-precious metal catalyst towards oxygen reduction reaction

Local structure and dynamics in the Na ion battery positive electrode material Na3V2(PO4)2F3

Understanding the structural and electronic properties of the cathode material NaFeF3 in a Na-ion battery

Hydrothermal synthesis, self-assembly and electrochemical performance of α-Fe2O3 microspheres for lithium ion batteries

Synergistically reinforced lithium storage performance of in situ chemically grown silicon@silicon oxide core-shell nanowires on three-dimensional conductive graphitic scaffolds

The synergistic effects of Al and Te on the structure and Li+-mobility of garnet-type solid electrolytes

Comparative investigation on the properties of carbon-supported cobalt-polypyrrole pyrolyzed at various conditions as electrocatalyst towards oxygen reduction reaction

Wetting pattern on TiO2 nanostructure films and its application as a template for selective materials growth

Performance and characterization of lithium-manganese-oxide cathode material with large tunnel structure for lithium batteries

Hydrothermal synthesis of nanosized LiMn O2 - Li2 Mn O3 compounds and their electrochemical performances

Vinyl ethylene sulfite as a new additive in propylene carbonate-based electrolyte for lithium ion batteries

Structural stabilities, electronic structures and lithium deintercalation in LixMSiO4 (M = Mn, Fe, Co, Ni): A GGA and GGA + U study

Sodium-ion-assisted hydrothermal synthesis of γ-MN O2 and its electrochemical performance

Preparation and electrochemical properties of Co3O 4-coated layered manganese oxide by a novel coating method

Structural and electronic properties of lithium ion battery anode material LiMN (M = Ni, Co, Cu)

Synthesis and characterization of Nafion/cross-linked PVP semi-interpenetrating polymer network membrane for direct methanol fuel cell

Structural design and two-dimensional conductivity of sheet-tube frameworks

Electrochemical behavior of copper current collector in imidazolium-based ionic liquid electrolytes

In-situ dilatometric study of Metal/Si multilayer film electrodes

Spinel LiMn2-x Tix O4 (x=0.5, 0.8) with High capacity and enhanced cycling stability synthesized by a modified sol-gel method

The effects of quenching treatment and AlF3 coating on LiNi0.5Mn0.5O2 cathode materials for lithium-ion battery

Structural stability and electronic properties of LiNiN

Structural and electronic properties of Li-ion battery cathode material FeF3

Silicon nanowires with and without carbon coating as anode materials for lithium-ion batteries

Anodic behavior of Al current collector in 1-alkyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] amide ionic liquid electrolytes

Spectroscopic and electrochemical characterization of the passive layer formed on lithium in gel polymer electrolytes containing propylene carbonate

Synthesis and electrochemical performance of Li2CoSiO4 as cathode material for lithium ion batteries

Synthesis and electrochemical characterization of PEO-based polymer electrolytes with room temperature ionic liquids

The catalyst-assisted synthesis of high quality CdS single-crystal nanowires through an epitaxy mechanism

Studies on storage characteristics of Li Ni0.4 Co0.2 Mn0.4 O2 as cathode materials in lithium-ion batteries

Preparation and properties of manganese oxide/carbon composites by reduction of potassium permanganate with acetylene black

Structural and electronic properties of the Li-ion battery cathode material LixCoSiO4

In situ micro-FTIR study of the solid-solid interface between lithium electrode and polymer electrolytes

Synthesis and storage performance of the doped LiMn2O 4spinel

Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO2

Recycle and recovery of rhodium complexes with water-soluble and amphiphilic phosphines in ionic liquids for hydroformylation of 1-hexene

Synthesis and characterization of Li2MnSiO4/C nanocomposite cathode material for lithium ion batteries

Investigation of lithium-manganese-oxides with large-tunnel structure as electrode material in Li-ion batteries

Ab initio calculations of the formation energies of lithium intercalations in SnSb

Effects of preparation methods of LiNi0.8Co0.2O 2 cathode materials on their morphology and electrochemical performance

Origin of deterioration for LiNiO2 cathode material during storage in air

Electrochemical performance and spectroscopic characterization of TiO 2-coated LiNi0.8Co0.2O2 cathode materials

Immobilization of rhodium complexes ligated with triphenyphosphine analogs on amino-functionalized MCM-41 and MCM-48 for 1-hexene hydroformylation

Preparation and characterization of LiM0.9Ti0.1O2 (M=Ni,Co) as anode materials

Comparison of Electrochemical and Surface Properties of Bare and TiO 2-Coated LiNi0.8Co0.2O2 Electrodes

Aqueous biphasic hydroformylation of higher olefins catalyzed by rhodium complexes with amphiphilic ligands of sulfonated triphenylphosphine analog

Structural, electrochemical and thermal properties of LiNi 0.8-yTiyCo0.2O2 as cathode materials for lithium ion battery

Electrochemical performance and surface properties of bare and TiO 2-coated cathode materials in lithium-ion batteries

A comparative study of LiNi0.8Co0.2O2 cathode materials modified by lattice-doping and surface-coating

Photoelectrochemical behavior of polypyrrole films in non-aqueous solutions

Raman spectroscopic study on the surface oxide layer of AB5-type metal hydride electrodes

Effects of surface treatment on metal hydride electrodes using a weak acid solution containing Ni(II)

In-situ and ex-situ Raman spectroscopic characterization of Li +-intercalation processes and structural changes of spinel or modified spinel materials

Total internal reflection sum-frequency spectroscopy: A strategy for studying molecular adsorption on metal surfaces

Studies on the Redox Reactions of Cobalt Electrodes in Alkaline Solution by Using In-situ Confocal Microprobe Raman Spectroscopy

In situ FTIR characterization of the electrooxidation of glassy carbon electrodes

In-situ study of the electrochemical deposition process of CdTe and HgxCd1-xTe using laser-scanning photoelectrochemical microscopy

Investigations of the pitting corrosion behavior of passive film on REBAR electrodes containing double prime artificial pit double prime in simulated cement solutions

Influence of surface pretreatment and charge-discharge mode on cycle performance of metal hydride electrodes

Effects of surface oxide species on the electropolymerization of o-aminophenol on pretreated glassy carbon electrodes

Mesoporous FePO4 with enhanced electrochemical performance as cathode materials of rechargeable lithium batteries

A study of novel anode material CoS2 for lithium ion battery

Characterization and hydroformylation performance of mesoporous MCM-41-supported water-soluble Rh complex dissolved in ionic liquids

Storage performance of the doped Li-Mn-O spinels

Spectroscopic characterization of Au3+ biosorption by waste biomass of Saccharomyces cerevisiae

Synthesis and characterization of Li2MnxFe 1-xSiO4 as a cathode material for lithium-ion batteries

Electronic properties of ultrathin titanium-wires

Formation energies of the lithium intercalations in MoS2

Synthesis, structure and electrochemical performance of titanium-doped spinel lithium manganese oxides

Iron-catalytic growth of prism-shaped single-crystal silicon nanowires by chemical vapor deposition of silane

The studies on structural and thermal properties of delithiated LixNi1/3Co1/3Mn1/3O2 (0 < x &le 1) as a cathode material in lithium ion batteries

The effects of decomposition products of electrolytes on the thermal stability of bare and TiO2-coated delithiated Li1-xNi0.8Co0.2O2 cathode materials

Synthesis and characterization of mesoporous titanium pyrophosphate as lithium intercalation electrode materials

Preparation, characterization and electrochemical performance of LiNi0.4 Co0.2Mn0.4O2 as cathode materials in lithium ion battery

Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium-ion batteries

Controllable synthesis and growth model of amorphous silicon nanotubes with periodically dome-shaped interiors

The selective synthesis of single-crystalline CdS nanobelts and nanowires by thermal evaporation at lower temperature

In situ photoelectrochemistry and Raman spectroscopic characterization on the surface oxide film of nickel electrode in 30 wt.% KOH solution

Hydrothermal synthesis and electrochemical performance of Li1.59 H0.41 MnO3 as a cathode material for lithium-ion battery

Investigation of the anodic behavior of Al current collector in room temperature ionic liquid electrolytes

Performance and characterization of metal hydride electrodes in nickel/metal hydride batteries

Investigations of lithium manganese oxide materials for lithium-ion batteries

Distribution and laser-induced behavior of lead monooxide on lead electrodes in acid solution

The study of Mg2Si/carbon composites as anode materials for lithium ion batteries

Nanostructured Li2FeSiO4 electrode material synthesized through hydrothermal-assisted sol-gel process

The reaction sequence of lithiation in Mg2Ge and the changes of its electronic structure

The effects of AlF3 coating on the performance of Li[Li 0.2 Mn0.54 Ni0.13 Co0.13]O 2 positive electrode material for lithium-ion battery

Effects of vinyl ethylene carbonate additive on elevated-temperature performance of cathode material in lithium ion batteries

A comparison of solid electrolyte interphase (SEI) on the artificial graphite anode of the aged and cycled commercial lithium ion cells

Ab initio study on the Li deintercalation in ternary lithium nitridocuprate Li2.5Cu0.5N

Electrochemical characterization of two types of PEO-based polymer electrolytes with room-temperature ionic liquids

Controllable synthesis of α- and β-MnO2: Cationic effect on hydrothermal crystallization

The effects of TiO2 coating on the electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for lithium-ion battery

Preparation and electrochemical performance of manganese oxide/carbon nanotubes composite as a cathode for rechargeable lithium battery with high power density

Structural and electrochemical characterization of xLi[Li 1/3Mn2/3]O2&middot(1-x)Li[Ni 1/3Mn1/3Co1/3]O2 (0&le χ x &le 0.9) as cathode materials for lithium ion batteries

A comparison of electrochemical performance of natural graphite sulfurized by ball-milling and heat-treating as an anode for lithium ion batteries

Effects of Na-substitution on structural and electronic properties of Li2CoSiO4 cathode material

Investigation of porous silicon/carbon composite as anodes for lithium ion batteries

Copper Phosphate as a Cathode Material for Rechargeable Li Batteries and Its Electrochemical Reaction Mechanism

Effects of cobalt precursor on pyrolyzed carbon-supported cobalt-polypyrrole as electrocatalyst toward oxygen reduction reaction

Economical synthesis and promotion of the electrochemical performance of silicon nanowires as anode material in li-ion batteries

In situ electrochemical XAFS studies on an iron fluoride high-capacity cathode material for rechargeable lithium batteries

First-principles investigations on the Na2MnPO4F as a cathode material for Na-ion batteries

The states of methanol within Nafion and sulfonated poly(phenylene ether ether sulfone) membranes

Structural stability and electronic and magnetic properties of fluorinated bilayer graphene

Understanding the high capacity of Li2FeSiO4: In situ XRD/XANES study combined with first-principles calculations

Toward Understanding the Lithium Transport Mechanism in Garnet-type Solid Electrolytes: Li+ Ion Exchanges and Their Mobility at Octahedral/Tetrahedral Sites

Synergistic Effects of Suberonitrile-LiBOB Binary Additives on the Electrochemical Performance of High-Voltage LiCoO2 Electrodes

P2-type Na0.66Ni0.33-xZnxMn0.67O2as new high-voltage cathode materials for sodium-ion batteries

A peanut shell inspired scalable synthesis of three-dimensional carbon coated porous silicon particles as an anode for lithium-ion batteries

Spray-drying synthesis of pure Na2 CoPO4 F as cathode material for sodium ion batteries

Synthesis and characterization of urchin-like Mn0.33Co0.67C2O4 for Li-ion batteries: Role of SEI layers for enhanced electrochemical properties

Modeling the SEI-formation on graphite electrodes in LiFePO4 batteries

Electrochemical behavior of suberonitrile as a high-potential electrolyte additive and Co-solvent for Li[Li0.2Mn0.56Ni0.16Co0.08]O2 cathode material

Graphene-Encapsulated Nanosheet-Assembled Zinc-Nickel-Cobalt Oxide Microspheres for Enhanced Lithium Storage

Interfacial nitrogen stabilizes carbon-coated mesoporous silicon particle anodes

Enhanced ionic conductivity of Li3.5Si0.5P0.5O4 with addition of lithium borate

NiSix/a-si Nanowires with Interfacial a-Ge as Anodes for High-Rate Lithium-Ion Batteries

Synthesis and Reaction Mechanism of Novel Fluorinated Carbon Fiber as a High-Voltage Cathode Material for Rechargeable Na Batteries

Enhancing the energy density of safer Li-ion batteries by combining high-voltage lithium cobalt fluorophosphate cathodes and nanostructured titania anodes

Degradation Mechanisms of C-6/LiFePO4 Batteries: Experimental Analyses of Calendar Aging

Nanostructured black phosphorus/Ketjenblack-multiwalled carbon nanotubes composite as high performance anode material for sodium-ion batteries

Degradation Mechanisms of C6/LiFePO4Batteries: Experimental Analyses of Cycling-induced Aging

Exploring the working mechanism of Li+in O3-type NaLi0.1Ni0.35Mn0.55O2cathode materials for rechargeable Na-ion batteries

Zero-Strain Na2FeSiO4as Novel Cathode Material for Sodium-Ion Batteries

Robust diamond-like Fe-Si network in the zero-strain NaxFeSiO4cathode

Insights into the Effects of Zinc Doping on Structural Phase Transition of P2-Type Sodium Nickel Manganese Oxide Cathodes for High-Energy Sodium Ion Batteries

Sol-gel synthesis of Na4Fe3(PO4)(2)(P2O7)/C nanocomposite for sodium ion batteries and new insights into microstructural evolution during sodium extraction

Cu-3(PO4)(2)/C composite as a high-capacity cathode material for rechargeable Na-ion batteries

Carbon-coated Si micrometer particles binding to reduced graphene oxide for a stable high-capacity lithium-ion battery anode

Novel insights into higher capacity from the Li-ion battery cathode material Li2FeSiO4

Degradation mechanisms of the graphite electrode in C6/LiFePO4batteries unraveled by a non-destructive approach

Toward a stable electrochemical interphase with enhanced safety on high-voltage LiCoO2cathode: A case of phosphazene additives

Synthesis and Electrochemical Performance of Lithium Rich Cathode Materials xLi(3)NbO(4)center dot(1-x)LiMO2 ( M=Mn, Co; 0 < x < 1) for Li-ion Batteries

Nanoscale chemical imaging of the additive effects on the interfaces of high-voltage LiCoO2 composite electrodes

Reversible multi-electron redox chemistry of pi-conjugated N-containing heteroaromatic molecule-based organic cathodes

Modeling the degradation mechanisms of C6/LiFePO4batteries

Exploring Highly Reversible 1.5-Electron Reactions (V3+/V4+/V5+) in Na3VCr(PO4)3Cathode for Sodium-Ion Batteries

Modeling the degradation mechanisms of C-6/LiFePO4 batteries

In Situ Monitoring of Structural and Valence Evolution during Electrochemical Desodiation/Sodiation Process of Na2Fe0.5Mn0.5PO4F

Insights into the Electrochemical Reaction Mechanism of a Novel Cathode Material CuNi2(PO4)2/C for Li-Ion Batteries

Advanced Characterization Techniques for Sodium-Ion Battery Studies

Toward a stable solid-electrolyte-interfaces on nickel-rich cathodes: LiPO2F2salt-type additive and its working mechanism for LiNi0.5Mn0.25Co0.25O2cathodes

Harnessing the concurrent reaction dynamics in active Si and Ge to achieve high performance lithium-ion batteries

Toward understanding of ion dynamics in highly conductive lithium ion conductors: Some perspectives by solid state NMR techniques

High Voltage Operation of Ni-Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases

The application of synchrotron X-ray techniques to the study of rechargeable batteries

Modeling the degradation mechanisms of C6/LiFePO4 batteries (vol 375, pg 106, 2017)

Capitalization of interfacial AlON interactions to achieve stable binder-free porous silicon/carbon anodes

Drawing a Soft Interface: An Effective Interfacial Modification Strategy for Garnet Type Solid-State Li Batteries

Enhanced electrochemical performance of high-energy lithium-sulfur batteries using an electrolyte with 1,1,2,2-tetrafluoro-3-(1,1,2,2-tetrafluoroethoxy)propane

Simultaneous Stabilization of LiNi0.76Mn0.14Co0.10O2 Cathode and Lithium Metal Anode by Lithium Bis(oxalato)borate as Additive

Stabilizing Li10SnP2S12/Li Interface via an in Situ Formed Solid Electrolyte Interphase Layer

Sodium storage behavior of Na0.66Ni0.33xZnxMn0.67O2 (x = 0, 0.07 and 0.14) positive materials in diglyme-based electrolytes

Identifying the Structural Evolution of the Sodium Ion Battery Na2FePO4F Cathode

Controlling Surface Oxides in Si/C Nanocomposite Anodes for High-Performance Li-Ion Batteries

Correlation between long range and local structural changes in Ni-rich layered materials during charge and discharge process

Scalable Engineering of Bulk Porous Si Anodes for High Initial Efficiency and High-Areal-Capacity Lithium-Ion Batteries

Degradation mechanisms of C6/LiNi0.5Mn0.3Co0.2O2 Li-ion batteries unraveled by non-destructive and post-mortem methods

Comprehensive Understanding of Reduction Mechanisms of Ethylene Sulfite in EC-Based Lithium-Ion Batteries

Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries

In Situ Generated Li2S-C Nanocomposite for High-Capacity and Long-Life All-Solid-State Lithium Sulfur Batteries with Ultrahigh Areal Mass Loading

Stable Cycling Lithium-Sulfur Solid Batteries with Enhanced Li/Li10GeP2S12 Solid Electrolyte Interface Stability

Impact of Structural Transformation on Electrochemical Performances of Li-Rich Cathode Materials: The Case of Li2RuO3

The roles of sulfur-containing additives and their working mechanism on the temperature-dependent performances of li-ion batteries

Toward a durable solid electrolyte film on the electrodes for Li-ion batteries with high performance

Poly(ethylene oxide)-Li10SnP2S12 Composite Polymer Electrolyte Enables High-Performance All-Solid-State Lithium Sulfur Battery

Structure-Performance Relationship of Zn2+ Substitution in P2-Na0.66Ni0.33Mn0.67O2 with Different Ni/Mn Ratios for High-Energy Sodium-Ion Batteries

Double-shelled microscale porous Si anodes for stable lithium-ion batteries

A novel NASICON-based glass-ceramic composite electrolyte with enhanced Na-ion conductivity

Exploring the high-voltage Mg2+/Na+ co-intercalation reaction of Na3VCr(PO4)(3) in Mg-ion batteries

Nanostructured porous CrN thin films by oblique angle magnetron sputtering for symmetric supercapacitors

Insights into the lithiation mechanism of CF: X by a joint high-resolution 19F NMR, in situ TEM and 7Li NMR approach

Porous organic polymers as heterogeneous ligands for highly selective hydroacylation

Novel Ordered Rocksalt-Type Lithium-Rich Li2Ru1-xNixO3-δ (0.3 ≤ x ≤ 0.5) Cathode Material with Tunable Anionic Redox Potential

Cross-linked beta alumina nanowires with compact gel polymer electrolyte coating for ultra-stable sodium metal battery

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

P2-Na0.67AlxMn1-xO2: Cost-Effective, Stable and High-Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility

Comparative study on the electronic structures and redox reactions in LiCrX2 and NaCrX2 (X = O and S)

Elucidating and Mitigating the Degradation of Cationic-Anionic Redox Processes in Li1.2Mn0.4Ti0.4O2 Cation-Disordered Cathode Materials

Facile one-pot synthesis of low cost MnO2 nanosheet/Super P Li composites with high oxygen reduction reaction activity for Zn-air batteries

Unraveling (electro)-chemical stability and interfacial reactions of Li10SnP2S12 in all-solid-state Li batteries

The Effects of Active Carbon on the Microstructure and Electrochemical Performance of Negative Electrode Active Material in Lead-acid Batteries

Highly-stable P2-Na0.67MnO2 electrode enabled by lattice tailoring and surface engineering

Tailoring the interfaces of silicon/carbon nanotube for high rate lithium-ion battery anodes

Additives synergy for stable interface formation on rechargeable lithium metal anodes

Flexible free-standing sulfurized polyacrylonitrile electrode for stable Li/Na storage

Good practice guide for papers on supercapacitors and related hybrid capacitors for the Journal of Power Sources

Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries

New Dimorphs of Na5V(PO4)(2)F-2 as an Ultrastable Cathode Material for Sodium-Ion Batteries

Good practice guide for papers on batteries for the Journal of Power Sources

Novel 3.9 v Layered Na3V3(PO4)4 Cathode Material for Sodium Ion Batteries

Tuning Oxygen Redox Reaction through the Inductive Effect with Proton Insertion in Li-Rich Oxides

Advanced characterization techniques for solid state lithium battery research

Highly-efficient conversion of SF6 via an eight-electron transfer process in lithium batteries

Identifying the anionic redox activity in cation-disordered Li1.25Nb0.25Fe0.50O2/C oxide cathodes for Li-ion batteries

Research Progress in Multielectron Reactions in Polyanionic Materials for Sodium-Ion Batteries

Construction of a Stable LiNi0.8Co0.1Mn0.1O2 (NCM811) Cathode Interface by a Multifunctional Organosilicon Electrolyte Additive

Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries

Restraining the polarization increase of Ni-rich and low-Co cathodes upon cycling by Al-doping

Ab initio calculations on the electronic structures and electrochemical properties of LiVO2 and NaVO2

Revealing the correlation between structural evolution and Li+ diffusion kinetics of nickel-rich cathode materials in Li-ion batteries

Electrochemical investigation of multi -electron reactions in NaVOPO 4 cathode for sodium -ion batteries

Low temperature growth of graphitic carbon on porous silicon for high-capacity lithium energy storage

High-Efficiency Lithium Metal Anode Enabled by a Concentrated/ Fluorinated Ester Electrolyte

Al and Fe-containing Mn-based layered cathode with controlled vacancies for high-rate sodium ion batteries

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)(3) Solid-State Lithium Batteries

The stability of P2-layered sodium transition metal oxides in ambient atmospheres

Identifying the anionic redox activity in cation-disordered Li1.25Nb0.25Fe0.50O2/C oxide cathodes for Li-ion batteries (vol 8, pg 5115, 2020)

Visualizing the growth process of sodium microstructures in sodium batteries by in-situ(23)Na MRI and NMR spectroscopy

Revealing the correlation between structure evolution and electrochemical performance of high-voltage lithium cobalt oxide

Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

Fluorination effect for stabilizing cationic and anionic redox activities in cation-disordered cathode materials

Interfaces in Garnet-Based All-Solid-State Lithium Batteries

Enabling Stable High-Voltage LiCoO(2)Operation by Using Synergetic Interfacial Modification Strategy

Li2S@NC composite enable high active material loading and high Li2S utilization for all-solid-state lithium sulfur batteries

Insights of the anionic redox in P2-Na0.67Ni0.33Mn0.67O2

Suppression of voltage-decay in Li2MnO3 cathode via reconstruction of layered-spinel coexisting phases

Advances in soft X-ray RIXS for studying redox reaction states in batteries

Mn4+-Substituted Li-Rich Li1.2Mn0.43+Mnx4+Ti0.4-xO2 Materials with High Energy Density

Selective Fabrication of Single-Molecule Junctions by Interface Engineering

On the Interface Design of Si and Multilayer Graphene for a High-Performance Li-Ion Battery Anode

Counter-Intuitive Structural Instability Aroused by Transition Metal Migration in Polyanionic Sodium Ion Host

Electrochemo-Mechanical Effects on Structural Integrity of Ni-Rich Cathodes with Different Microstructures in All Solid-State Batteries

Kinetics of lithium dendrite growth in garnet-type solid electrolyte

Bulk boron doping and surface carbon coating enabling fast-charging and stable Si anodes: from thin film to thick Si electrodes

Fluorinated graphite nanosheets for ultrahigh-capacity lithium primary batteries

Polyanion compounds as cathode materials for li-ion batteries

Quantifying the reaction mechanisms of a high-capacity CuP2/C composite anode for potassium ion batteries

Solid-State NMR and MRI Spectroscopy for Li/Na Batteries: Materials, Interface, and In Situ Characterization

Interfacial compatibility issues in rechargeable solid-state lithium metal batteries: a review

Lithium Host:Advanced architecture components for lithium metal anode

Stabilizing Ni-Rich LiNi0.83Co0.12Mn0.05O2 with Cyclopentyl Isocyanate as a Novel Electrolyte Additive

Reversible Multi-Electron Storage Enabled by Na5V(PO4)(2)F-2 for Rechargeable Magnesium Batteries

Insight into Ion Diffusion Dynamics/Mechanisms and Electronic Structure of Highly Conductive Sodium-Rich Na(3+x)LaxZr(2)-xSi(2)PO(12) (0 <= x <= 0.5) Solid-State Electrolytes

Modification and regulation of electrode/electrolyte interface for high specific energy and long life lithium ion batteries

Unravelling the Fast Alkali-Ion Dynamics in Paramagnetic Battery Materials Combined with NMR and Deep-Potential Molecular Dynamics Simulation

State of health (SoH) estimation and degradation modes analysis of pouch NMC532/graphite Li-ion battery

Initial Stages of Oxidation Reactions of Ethylene Carbonate and Fluoroethylene Carbonate on LixCoO2 Surfaces: A DFT Study

Enhanced Cycle Life and Rate Capability of Single-Crystal, Ni-Rich LiNi0.9Co0.05Mn0.05O2 Enabled by 1,2,4-1H-Triazole Additive

Uniformity of Flat Li-Ion Batteries Studied by Diffraction and Imaging of X-rays and Neutrons

O3-Type NaCrO2 as a Superior Cathode Material for Sodium/Potassium-Ion Batteries Ensured by High Structural Reversibility

Origin of High Ionic Conductivity of Sc-Doped Sodium-Rich NASICON Solid-State Electrolytes

CHAPTER 1: NMR Principles of Paramagnetic Materials

CHAPTER 7: Intercalation and Alloying Anode Materials for Rechargeable Li/Na Batteries

CHAPTER 5: Oxide-based Cathode Materials for Li- And Na-ion Batteries

CHAPTER 9: NMR Studies of Oxide-type Solid State Electrolytes in All Solid State Batteries

Understanding the effect of Nb substitution on Li-Mn-rich layered oxides

Recent Progress in All-Solid-State Lithium?Sulfur Batteries Using High Li-Ion Conductive Solid Electrolytes

Insights of the Electrochemical Reversibility of P2-Type Sodium Manganese Oxide Cathodes via Modulation of Transition Metal Vacancies

All solid thick oxide cathodes based on low temperature sintering for high energy solid batteries

Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries

Fluorinated cyclic siloxane additives for high energy density Li-ion batteries with high nickel cathodes and silicon-carbon anodes

Constructing a High-Energy and Durable Single-Crystal NCM811 Cathode for All-Solid-State Batteries by a Surface Engineering Strategy

Interfacial Enhancement of Silicon-Based Anode by a Lactam-Type Electrolyte Additive

Enhancing the Reduction Kinetics of Li-SF6 Batteries by Dispersed Cobalt Phthalocyanines on Porous Carbon

Linking the Defects to the Formation and Growth of Li Dendrite in All-Solid-State Batteries

A novel trimethylsilyl 2-(fluorosulfonyl)difluoroacetate additive for stabilizing the Ni-rich LiNi0.9Co0.05Mn0.05O2/electrolyte interface

Enhanced Interfacial Stability of a LiNi0.9Co0.05Mn0.05O2 Cathode by a Diboron Additive

Mechanistic Probing of Encapsulation and Confined Growth of Lithium Crystals in Carbonaceous Nanotubes

Research Progresses of Sodium Cobalt Oxide as Cathode in Sodium Ion Batteries

Compatibility of Various Electrolytes with Cation Disordered Rocksalt Cathodes in Lithium Ion Batteries

Electrolyte Additive cis-1,2,3,6-Tetrahydrophthalic Anhydride Enhanced the Cycle Life of Nickel-Rich LiNi0.9Co0.05Mn0.05O2

Stabilizing the LiCoO2 Interface at High Voltage with an Electrolyte Additive 2,4,6-Tris(4-fluorophenyl)boroxin

Quantitatively analyzing the failure processes of rechargeable Li metal batteries

Tailoring the redox-active transition metal content to enhance cycling stability in cation-disordered rock-salt oxides

Formulating a New Electrolyte: Synergy between Low-Polar and Non-polar Solvents in Tailoring the Solid Electrolyte Interface for the Silicon Anode

The origins of kinetics hysteresis and irreversibility of monoclinic Li3V2(PO4)3

Boosting the Energy Density of Li parallel to CFx Primary Batteries Using a 1,3-Dimethyl-2-imidazolidinone-Based Electrolyte

Insights into the local structure, microstructure and ionic conductivity of silicon doped NASICON-type solid electrolyte Li1.3Al0.3Ti1.7P3O12

Size-Dependent Chemomechanical Failure of Sulfide Solid Electrolyte Particles during Electrochemical Reaction with Lithium

Recognition of V3+/V4+/V5+ Multielectron Reactions in Na3V(PO4)(2): A Potential High Energy Density Cathode for Sodium-Ion Batteries

Advance in interface and characterizations of sulfide solid electrolyte materials

A facile synthesis of non-aqueous LiPO2F2 solution as the electrolyte additive for high performance lithium ion batteries

Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques

Neutron Depth Profiling Technique for Studying Rechargeable Lithium Metal Anodes

Pillar-beam structures prevent layered cathode materials from destructive phase transitions

Exploring hybrid Mg2+ /H+ reactions of C@MgMnSiO(4 )with boosted voltage in magnesium-ion batteries

Regulating Interfacial Li-Ion Transport via an Integrated Corrugated 3D Skeleton in Solid Composite Electrolyte for All-Solid-State Lithium Metal Batteries

Tuning interface stability of nickel-rich LiNi0.9Co0.05Mn0.05O2 cathode via a novel bis(vinylsulphonyl)methane additive

Modification of NASICON Electrolyte and Its Application in Real Na-Ion Cells

Highly stable operation of LiCoO2 at cut-off >= 4.6 V enabled by synergistic structural and interfacial manipulation

Improving interfacial stability of high voltage LiCoO2-based cells with 4-methylmorpholine-2,6-dione additive

In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes

Lithium-ion spontaneous exchange and synergistic transport in ceramic-liquid hybrid electrolytes for highly efficient lithium-ion transfer

Temperature-dependence of calcination processes of Ni-rich layered oxides

Pushing Lithium Cobalt Oxides to 4.7 V by Lattice-Matched Interfacial Engineering

Dictating the interfacial stability of nickel-rich LiNi0.90Co0.05Mn0.05O2 via a diazacyclo electrolyte additive-2-Fluoropyrazine

Boosting high voltage cycling of LiCoO2 cathode via triisopropanolamine cyclic borate electrolyte additive

Synergistical Stabilization of Li Metal Anodesand LiCoO2 Cathodes in High-VoltageLi parallel to LiCoO(2 )Batteries by Potassium Selenocyanate (KSeCN) Additive

Stable cycling and fast charging of high-voltage lithium metal batteries enabled by functional solvation chemistry

Improved Capacity Retention for a Disordered Rocksalt Cathode via Solvate Ionic Liquid Electrolytes

Substantially Promoted Energy Density of Li parallel to CFx Primary Battery Enabled by Li+-DMP Coordinated Structure

Guidelines for Air-Stable Lithium/Sodium Layered Oxide Cathodes

Combining NMR and molecular dynamics simulations for revealing the alkali-ion transport in solid-state battery materials

Elastic Lattice Enabling Reversible Tetrahedral Li Storage Sites in a High-Capacity Manganese Oxide Cathode

Modulation and Quantitative Study of Conformal Electrode-Electrolyte Interfacial Chemistry Toward High-Energy-Density Lini0.6co0.2mn0.2o2Sio-C Pouch Cells

A machine learning protocol for revealing ion transport mechanisms from dynamic NMR shifts in paramagnetic battery materials

Sieving carbons promise practical anodes with extensible low-potential plateaus for sodium batteries

Mitigating the Surface Reconstruction of Ni-Rich Cathode via P2-Type Mn-Rich Oxide Coating for Durable Lithium Ion Batteries

Promoting the performances of P2-type sodium layered cathode by inducing Na site rearrangement

Guidelines for Air-Stable Lithium/Sodium Layered Oxide Cathodes

In Situ Construction of a LiF-Enriched Interfacial Modification Layer for Stable All-Solid-State Batteries

Highly reversible Li2RuO3 cathodes in sulfide-based all solid-state lithium batteries

In Situ Construction of a LiF-Enriched Interfacial Modification Layer for Stable All-Solid-State Batteries

Bulk/Interfacial Synergetic Approaches Enable the Stable Anode for High Energy Density All- Solid-State Lithium-Sulfur Batteries

Protocol for quantifying inactive lithium in anode-free lithium batteries by mass spectrometry titration

Quantifying the Evolution of Inactive Li/Lithium Hydride and Their Correlations in Rechargeable Anode-free Li Batteries

Development of a Reliable High-Performance WLP for a SAW Device

Strengthening the Interfacial Stability of the Silicon-Based Electrode via an Electrolyte Additive-Allyl Phenyl Sulfone

Chemical and structural evolutions of Li-Mn-rich layered electrodes at different current densities

Enabling High-Voltage "Superconcentrated Ionogel-in-Ceramic" Hybrid Electrolyte with Ultrahigh Ionic Conductivity and Single Li+-Ion Transference Number

Visualizing the failure of solid electrolyte under GPa-level interface stress induced by lithium eruption

Promoting the conversion of S and Li2S using a Co3O4@NC additive in all-solid-state Li-S batteries

Tailoring Electrolyte Dehydrogenation with Trace Additives: Stabilizing the LiCoO2 Cathode beyond 4.6 V

Insights into the Reaction Mechanisms of Nongraphitic High-Surface Porous Carbons for Application in Na- and Mg-Ion Batteries

Modulation and quantitative study of conformal electrode-electrolyte interfacial chemistry toward high-energy-density LiNi0.6Co0.2Mn0.2O2?SiO-C pouch cells

Rational design of electrolyte solvation structure for stable cycling and fast charging lithium metal batteries

Tailoring Electrolyte Dehydrogenation with Trace Additives: Stabilizing the LiCoO2 Cathode beyond 4.6 V

A Nearly Zero-Strain Li-Rich Rock-Salt Oxide with Multielectron Redox Reactions as a Cathode for Li-Ion Batteries

From Contaminated to Highly Lithiated Interfaces: A Versatile Modification Strategy for Garnet Solid Electrolytes

Li2Se: A High Ionic Conductivity Interface to Inhibit the Growth of Lithium Dendrites in Garnet Solid Electrolytes

Advances in sulfide-based all-solid-state lithium-sulfur battery: Materials, composite electrodes and electrochemo-mechanical effects

Revealing the surface-to-bulk degradation mechanism of nickel-rich cathode in sulfide all-solid-state batteries

Electrochemo-Mechanical Stresses and Their Measurements in Sulfide-Based All-Solid-State Batteries: A Review

Synergetic LaPO4 and Al2O3 hybrid coating strengthens the interfacial stability of LiCoO2 at 4.6 V

Progress of Atomic Layer Deposition and Molecular Layer Deposition in the Development of All-Solid-State Lithium Batteries

2,2,5,5-Tetramethyl-2,5-disila-1-oxacyclopentane as a bifunctional electrolyte additive for Ni-rich (LiNi0.9Co0.05Mn0.05O2) cathode in Li-ion batteries

Dual-Salt Localized High-Concentration Electrolyte for Long Cycle Life Silicon-Based Lithium-Ion Batteries

Olivine-Type MgMn0.5Zn0.5SiO4 Cathode for Mg-Batteries: Experimental Studies and First Principles Calculations

Constructing a Stabilized Cathode Electrolyte Interphase for High- Voltage LiCoO2 Batteries via the Phenylmaleic Anhydride Additive

A Critical Evaluation of Interfacial Stability in Li-Excess Cation-Disordered Rock-Salt Oxide Cathode

Enabling interfacial stability of LiCoO2 batteries at an ultrahigh cutoff voltage >= 4.65 V via a synergetic electrolyte strategy

Layered Oxide Cathodes for Sodium-Ion Batteries: Storage Mechanism, Electrochemistry, and Techno-economics

Layered Oxide Cathodes for Sodium-Ion Batteries: Storage Mechanism, Electrochemistry, and Techno-economics

Application of Electrochemical Impedance Spectroscopy to Degradation and Aging Research of Lithium-Ion Batteries

Enabling Excellent Thermal Stability of an Ultrahigh Nickel-Rich Cathode (LiNi0.90Co0.05Mn0.05O2) by a Magnesium and Titanium Codoping Strategy

Enabling Superior Cycling Stability of LiNi_0.9Co_0.05Mn_0.05O₂ with Controllable Internal Strain

Assembly of an Elastic & Sticky Interfacial Layer for Sulfide-Based All-Solid-State Batteries

A Critical Evaluation of Interfacial Stability in Li-excess Cation-disordered Rock-salt Oxide Cathode

Assembly of an Elastic & Sticky Interfacial Layer for Sulfide-Based All-Solid-State Batteries

Assembly of an Elastic & Sticky Interfacial Layer for Sulfide-Based All-Solid-State Batteries

Extending the high-voltage operation of Graphite/NCM811 cells by constructing a robust electrode/electrolyte interphase layer

Li2S-Based Composite Cathode with in Situ-Generated Li3PS4 Electrolyte on Li2S for Advanced All-Solid-State Lithium-Sulfur Batteries

The nature and suppression strategies of interfacial reactions in all-solid-state batteries

Gas induced formation of inactive Li in rechargeable lithium metal batteries

Long-Life and High-Loading All-Solid-State Li-S Batteries Enabled by Acetylene Black with Dispersed Co-N₄ as Single Atom Catalyst

Boosting Electrochemical Performance of Co-Free Ni-Rich Cathodes by Combination of Al and High-Valence Elements

Assembly of an elastic & sticky interfacial layer for sulfide-based all-solid-state batteries

Boosting Electrochemical Performance of Co-Free Ni-Rich Cathodes by Combination of Al and High-Valence Elements

Fluorinated Solvent Molecule Tuning Enables Fast-Charging and Low-Temperature Lithium-Ion Batteries

Quantifying Degradation Parameters of Single-Crystalline Ni-Rich Cathodes in Lithium-Ion Batteries

Perspective on the Preparation Methods of Single Crystalline High Nickel Oxide Cathode Materials

The applications of solid-state NMR and MRI techniques in the study of rechargeable sodium-ion batteries

Understanding the failure process of sulfide-based all-solid-state lithium batteries via operando nuclear magnetic resonance spectroscopy

Surface Engineering Strategy Enables 4.5 V Sulfide-Based All-Solid-State Batteries with High Cathode Loading and Long Cycle Life

Boosting electrochemical performance of Co-free Ni-rich cathodes by combination of Al and high-valence elements

Enabling stable and high areal capacity solid state battery with Ni-rich cathode via failure mechanism study

The Magnesium Insertion Effects into P2-Type Na_2/3Ni_1/3Mn_2/3O₂

Decoding Internal Stress-Induced Micro-Short Circuit Events in Sulfide-Based All-Solid-State Li-Metal Batteries via Operando Pressure Measurements

The Insight of Micro-Short Circuits Caused by Electrochemo-Mechanical Stress Crosstalk in All-Solid-State Li Metal Batteries

Additive evolved stabilized dual electrode-electrolyte interphases propelling the high-voltage Li||LiCoO2 batteries up to 4.7 V

The insight of micro-short circuits caused by electrochemo-mechanical stress crosstalk in all-solid-state Li metal batteries

Clarifying the Temperature-Dependent Lithium Deposition/Stripping Process and the Evolution of Inactive Li in Lithium Metal Batteries

High-areal-capacity all-solid-state Li-S battery enabled by dry process technology

The Highly Operational Team (HOT) toward <i>f</i>-Block Materials

Electrolyte Degradation During Aging Process of Lithium-Ion Batteries: Mechanisms, Characterization, and Quantitative Analysis

Unveiling the thermal decomposition mechanism of high-nickel cathode with loaded nano-Al₂O₃on conductive carbon for safe lithium-ion batteries

Visualizing the SEI formation between lithium metal and solid-state electrolyte

Construction of Elastic and Conductive Channels for High-Rate and High-Areal-Capacity Sulfur Cathodes in All-Solid-State Lithium-Sulfur Batteries

Nano-Scale Interface Engineering of Sulfur Cathode to Enable High-Performance All-Solid-State Li-S Batteries

Three-dimensional graphene networks as efficient Sb anode skeleton for high-performance Si-based sodium ion microbatteries

Magnetic resonance imaging techniques for lithium-ion batteries: Principles and applications

Asymmetric Sulfur Redox Paths in Sulfide-Based All-Solid-State Lithium-Sulfur Batteries

Quantitative Analysis of Active Lithium Loss and Degradation Mechanism in Temperature Accelerated Aging Process of Lithium-Ion Batteries

Comparative study of thermodynamic & kinetic parameters measuring techniques in lithium-ion batteries

Liquid-Phase Preparation of Low-Tortuosity Composite Cathode for High Active Material Content All-Solid-State Lithium Batteries

Recent advances in quantifying the inactive lithium and failure mechanism of Li anodes in rechargeable lithium metal batteries

Advances in battery state estimation of battery management system in electric vehicles

Consummating ion desolvation in hard carbon anodes for reversible sodium storage

Unveiling the Three Stages of Li Plating and Dynamic Evolution Processes in Pouch C/LiFePO₄ Batteries

A "Liquid-In-Solid" Electrolyte for High-Voltage Anode-Free Rechargeable Sodium Batteries

Effects on the structure and electrochemical reactivity of surface modified magnesium cobalt oxide

Unveiling the Crucial Role of Dissolved Fe<SUP>2+</SUP> on the Solid Electrolyte Interphase in Long-life LiFePO₄/Graphite Batteries

Electrolyte Strategy Enables High-Rate Lithium Carbon Fluoride (Li/CF_x) Primary Batteries in All-Climate Environments