已发表成果:
WOK 论文 46 篇;中文核心 2 篇;其它论文 8 篇;专利发明 1 个;图书及章节 1 本;
Multiscale concurrent topology optimization for thermoelastic structures under design-dependent varying temperature field
Topology optimization for transient thermoelastic structures under time-dependent loads
<p>Accelerating optimization of IN718 by mapping alloying effects on phase stabilities and mechanical properties using high-throughput calculations</p>
Atomic-scale investigations on dislocation-precipitate interactions influenced by voids in Ni-based superalloys
Exploring the alloying effects on generalized stacking fault energy and ideal strength of Ni and Ni3Al phases in Ni-based superalloys
Research on Target Defense Strategy Based on Deep Reinforcement Learning
Plasticity-induced stacking fault behaviors of gamma ' precipitates in novel CoNi-based superalloys
Accelerating the discovery of novel γ/γ' Co-based superalloys by probing temperature and alloying effects on the γ' precipitates
Influence of Processing Technology on Electrochemical Corrosion Behavior of Ti-6Al-4V Alloys
Misorientation effect of twist grain boundaries on crack nucleation from molecular dynamics
Unveiling segregation-induced evolution in phase constitution of Cu-containing high-entropy alloys
Exploring alloying effect on phase stability and mechanical properties of gamma ''-Ni3Nb precipitates with first-principles calculations
First-principles study of phase stability and temperature-dependent mechanical properties of (Cr, M)(23)C-6 (M = Fe, Mo) phases
Molecular dynamics study on tensile strength of twist grain boundary structures under uniaxial tension in copper
Theoretical investigation of the crystallographic structure, anisotropic elastic response, and electronic properties of the major borides in Ni-based superalloys
Theoretical investigations of solid-solution effect on the twinning of Ni
Exploration of crystal structure and the origin of unexpected intrinsic ductility of χCo7Ta2
Compound optimal control of harmonic drive considering hysteresis characteristic
Generalized stacking fault energies of Cr23C6 carbide: A first-principles study
High-temperature mechanical and thermodynamic properties of silicon carbide polytypes
Accelerating exploitation of Co-Al-based superalloys from theoretical study
Dynamics analysis of a missile vehicle considering the pavement roughness
Interacting effects induced by two neighboring pits considering relative position parameters and pit depth
Fatigue Assessment of Explosive Bolts Considering Vibration of Fixtures
A first-principles study of the diffusion coefficients of alloying elements in dilute alpha-Ti alloys
Equivalent crack size model for pre-corrosion fatigue life prediction of aluminum alloy 7075-T6
Quantitative correlation between geometric parameters and stress concentration of corrosion pits
Critical condition for the transformation from Taylor cone to cone-jet
Vibration performance analysis of electromagnetic resonance fatigue testing system
Statistical analysis of pit dimensions for pre-corroded AA 7075-T6
Feature recognition of corrosion pit for pre-corroded AA 2524 and statistical analysis
Correlation between the geometric parameters of corrosion pit and stress concentration factor
Vibration simulations of double-walled carbon nanotubes by finite element method
The computation of elastic constants of double wall carbon nanotubes based on the finite element method considering Van Der Waals' force
Axial buckling behavior of double-wall carbon nanotubes by finite element simulation
The Effects of Different Defects on Vibration Properties of Single-walled Carbon Nanotubes
Numerical Simulation of Creep Crack Propagation for Austenitic Stainless Steel 0Cr18Ni9 at 550 degrees C
Tensile creep behavior and strain-rate sensitivity of superalloy GH4049 at elevated temperatures
Axial buckling behavior of single-walled carbon nanotubes with finite element modeling
A simplified computation method of plastic limit load for tee joint containing corner cracks
The effects of different defects on buckling behavior of single-walled carbon nanotubes
The effects of different defects on the elastic constants of single-walled carbon nanotubes
Algorithm based on the gradient-Hamilton decomposition theory of vector fields
Poincaré map based on splitting methods
Poincare Map Based on Splitting Methods
Structure-preserving algorithms for the Lorenz system
孔隙对3D打印功能梯度材料验证轮盘破裂转速影响分析
航空制造技术,1671-833X,2023-07-01.0Cr18Ni9不锈钢的高温疲劳裂纹扩展规律
机械强度,1001-9669,2012.冲击参数对TC4钛合金模拟叶片损伤有限元模拟研究
燃气涡轮试验与研究,1672-2620,2022-04-15.基于决策树的多防御方目标攻防决策
宇航总体技术,2096-4080,2021-09-15.Ti-6Al-4V(ELI)合金在盐酸溶液中的电化学腐蚀行为及数值模拟
燃气涡轮试验与研究,1672-2620,2021-06-15.离散力学与最优控制理论在谐波减速器控制中的应用研究
燃气涡轮试验与研究,1672-2620,2020-04-15.JJG1136-2017《扭转疲劳试验机检定规程》解读
中国计量,1006-9364,2018.基于ABAQUS的谐波减速器装配及运转过程中柔轮的力学响应分析
科技创新导报,1673-0534,2017.镍基高温合金中碳化物的稳定性及广义层错的理论研究
2016年航空科学与技术全国博士生学术论坛摘要集,,2016-11-25.复杂结构塑性极限分析的修正弹性补偿法
压力容器 ,1001-4837 ,2009.现代机械强度引论. (教材 ). 冶金工业出版社, 2014年06月.