3D printing of thick film NTC thermistor from preceramic polymer composites for ultra-high temperature measurement

Research on performance of porous scaffold-based getter activated by induction heating and its application in MEMS device

Strong Robustness Quad Mass Gyroscope With the Parallel Coupled Structure Design

Performance enhanced Ti-based thin film getter with porous nickel as scaffold

Rapid laser fabrication of indium tin oxide and polymer-derived ceramic composite thin films for high-temperature sensors

Piezoelectric-pneumatic material jetting printing for non-contact conformal fabrication of high-temperature thick-film sensors

A New Fabrication Method for Capacitive Displacement Sensor

Design and simulation of capacitive sensor for grain moisture detection

Subtractive manufacturing of polymer-derived ceramic composite thick film sensor based on ultrafast laser etching

Ultrafast high-temperature sintering of polymer-derived ceramic thick film sensors

A flexible pressure sensor with highly customizable sensitivity and linearity via positive design of microhierarchical structures with a hyperelastic model

Performance Enhanced Ti-Based Thin Film Getter with Porous Nickel as Scaffold

La(Ca)CrO₃-Filled SiCN Precursor Thin Film Temperature Sensor Capable to Measure up to 1100°C High Temperature

Fabrication of flexible organic field effect transistors with high carrier mobility via sheath gas-assisted direct writing Poly (3-hexylthiophene) solution

A magnetic soft robot with multimodal sensing capability by multimaterial direct ink writing

Direct Writing of Liquid Metal onto an Electrospun Graphene Oxide Composite Polymer Nanofiber Membrane for Robust and Stretchable Electrodes

An Anisotropic Dielectric Elastomer Actuator with an Oriented Electrospun Nanofiber Composite Film

New π spring for piezostack-driven jetting dispenser

A Focusing Method of Liquid Lens Based on Capacitance Detection

Fabrication of Flexible Organic Field Effect Transistors with High Carrier Mobility Via Sheath Gas-Assisted Direct Writing Poly(3-Hexylthiophene) Solution

A preparation technology of micro-structure glass based on mixed micro and nano powders

Research Progresses of Micro-area Induction Heating Technology in Micro/Nano Systems

Preparation and Properties Characterization of Nano-Composite Scaffold Getter With Induction Heating

An Innovative LC-C Resonant Pressure Sensor Based on Capacitive Feedthroughs

A high-sensitivity graphene ammonia sensor via aerosol jet printing

Failure mechanism analysis and experimental study of lead zirconate titanate actuators in piezoelectric micro jetting valve

Shorting out bonding method for multi-stack anodic bonding and its application in wafer-level packaging

A Remote-Controlled Robotic System with Safety Protection Strategy Based on Force-Sensing and Bending Feedback for Transcatheter Arterial Chemoembolization

Tannic acid modified single nanopore with multivalent metal ions recognition and ultra-trace level detection

Nanofibrous Membranes with High Air Permeability and Fluffy Structure based on Low Temperature Electrospinning Technology

Adaptive electrofluid-actuated liquid lens

Research on nozzle and needle combination for high frequency piezostack-driven dispenser

Design and experiment of a jetting dispenser with compact amplifying mechanism and low stress in piezostack

Investigation on Nickel-Based Nano-Scaffold Getter With Induction Heating and Rapid Activation

Review on progress of variable-focus liquid lens

Effect of Enhanced Squeezing Needle Structure on the Jetting Performance of a Piezostack-Driven Dispenser

Investigation on Nickel-based Nano-scaffold Getter with Induction Heating and Rapid Activation

Pressure Sensor Based on Polyvinylidene Fluoride Nanofibers Directly Written upon Silicon Substrate

Design and Experiment of High Frequency Jetting Dispenser Driven by Double Piezoelectric Stacks

Direct write of a flexible high-sensitivity pressure sensor with fast response for electronic skins

A simple graphene NH3 gas sensor via laser direct writing

Enhanced Piezoelectric Performance of Electrospun PVDF Nanofibers with Liquid Metal Electrodes

Improve the performance of mechanoelectrical transduction of ionic polymer-metal composites based on ordered Nafion nanofibres by electrospinning

A novel piezostack-driven jetting dispenser with corner-filleted flexure hinge and high-frequency performance

Shoepad nanogenerator based on electrospun PVDF nanofibers

Biomimetic Beetle-Inspired Flapping Air Vehicle Actuated by Ionic Polymer-Metal Composite Actuator

Direct write micro/nano optical fibers by near-field melt electrospinning

Vibration modes interference in the MEMS resonant pressure sensor

Investigation of electrohydrodynamic behaviors from open planar solution under rod-induced electrospinning

Direct-write graphene resistors on aromatic polyimide for transparent heating glass

Direct writing based on Weissenberg effect

Design of temperature-immunization system packaging for the resonant pressure sensor

High-Q wafer level package based on modified tri-layer anodic bonding and high performance getter and its evaluation for micro resonant pressure sensor

High Accuracy Resonant Pressure Sensor With Balanced-Mass DETF Resonator and Twinborn Diaphragms

Two-dimensional spin coating technology and the effect of artificial gravity on film’s air-bubbling

Study of thermal electrical modified etching for glass and its application in structure etching

Electrospinning of aligned PVDF nanofibers with piezoelectricity and its application in pressure sensors

Enhanced Deposition Uniformity via an Auxiliary Electrode in Massive Electrospinning

Experimental investigation of piezoelectricity of near field electrospun PVDF nanofibers

Development of a microforce sensor and its array platform for robotic cell microinjection force measurement

Void suppression and micro composite regulation in glass frit bonding

Glass frit bonding with controlled width and height using a two-step wet silicon etching procedure

Laterally Driven Resonant Pressure Sensor with Etched Silicon Dual Diaphragms and Combined Beams

Design and manufacturing of a passive pressure sensor based on LC resonance

A study on the influence of the nozzle lead angle on the performance of liquid metal electromagnetic micro-jetting

3D Printing Stereo Networks Microfluidic Concentration Gradient Chip

Electrospinning-induced preferred dipole orientation in PVDF fibers

Simulation and typical application of multi-step diffusion method for MEMS device layers

A novel sacrificial-layer process based on anodic bonding and its application in an accelerometer

Predicting polymorphism of electrospun polyvinylidene fluoride membranes by their morphologies

Study of PSG thickness uniformity influencing factors in LPCVD

Strategies for defect-free and deep wet etching of Pyrex 7740

Poly (vinylidene fluoride) piezoelectric nanofibers fabricated by non-uniform field electrospinning

The prediction of Micro/Nano voids in glass frit ring by simulation

Comparative analysis on the temperature characteristic of three type support beams in mems resonator structure

Application of Aerosol Jet technology in through-via interconnection for MEMS wafer-level packaging

Simulation and experiment study on adhesive ejection behavior in jetting dispenser

Vertically aligned carbon nanotubes transfer with glass frit

Accuracy analysis of quality factor measurement based on time domain method for MEMS resonators

Effects of structure and air damping on quality factor under various pressure environments based on experimental research

Spectroscopic evidence for a high fraction of ferroelectric phase induced in electrospun polyvinylidene fluoride fibers

Design and experiment of a jetting dispenser driven by piezostack actuator

Piezoelectric performance of aligned PVDF nanofibers fabricated by electrospinning and mechanical spinning

A novel method to modify the lapping uniformity for silicon wafer

Discussion on the Lapping and Polishing Process of 4H-SiC Wafer

Visual servoing methods in robot-assist cell microinjection system

LQG control for sensing mode of micro tunneling gyroscope

Construction and analysis of probe array induced 3D electrospun nanofiber structure

Emulated Analysis of the Preview-LQG Controller for Micromachined Tunneling Gyroscope

Application of nonlinear driving in frequency matching of tunneling gyroscope

Comparison of glass etching properties between HCl and HNO3 solution

Design and simulation of fully-symmetrical resonant pressure sensor

Time-varying predictive-LQG control for micromechanical tunneling gyroscope

A novel electrohydrodynamic printing jet head with retractable needle

Directly electrospun ultrafine nanofibres with Cu grid spinneret

Direct Fabrication of Polymer Nanofiber Membrane for Piezoelectric Vibration Sensor

Design and simulation of a differential and decoupled micromachined gyroscope

A novel bulk micromachined tunneling gyroscope

Large-scale patterned nanofibers via tip-less electrospinning

The LQG controller design for micromachined tunneling gyroscope

Design and simulation of electrostatic inkjet head

Design and fabrication of bulk micromachined tunneling gyroscope with fan-shaped comb drivers

Application of ultrasonic technology to wet etching of silicon

Weak current detection technique for electrostatic droplet ejection

Deposition characteristics of direct-write suspended micro/nano-structures

The effect of temperature on field emission current

Etch-back in DDSOG process by ultrasonic agitation and application to tunneling gyroscope fabrication

Investigations on electrohydrodynamical drop-on-demand inkjet printing

Patterned deposition of PEO nanofibers

A novel bonding architecture based on AAO

Pattern deposition of electrosprayed polymer nanoparticles

Fabrication of nano-tips employing three different methods