已发表成果:
WOK 论文 124 篇;中文核心 36 篇;其它论文 2 篇;专利发明 25 个;
Synthesis of Hydrophobic Ordered Mesoporous Silica Films
Preparation and Characterization of Polyaluminocarbosilane at Different Temperatures
Ceramic Precursor Aluminum-Containing Polycarbosilane: Preparation and Structure
Preparation of Silica Aerogels via Ambient Pressure Drying
Synthesis and Characterization of Liquid Polycarbosilane-derived Polyaluminocarbosilane
Fabrication of SiC fibres from yttrium-containing polycarbosilane
Fabrication of Silicon Carbide (SiC) Coatings from Pyrolysis of Polycarbosilane/Aluminum
Synthesis of Spherical Non-Oxide Silicon Carbonitride Ceramic Particles
Rapid purification of anti-SARS-CoV protein N monoclonal antibody by using magnetic beads
Preparation and surface modification mechanism of silica aerogels via ambient pressure drying
Quantitative determinations in the molecular structures of polyaluminocarbosilane
Full dense SiCN ceramics derived from polysilazane
Hydrophobic flexible silica aerogels felts fabricated by ambient pressure drying
The monolithic silica aerogel derived from MTMS/TEOS
Preparation and characterization of PAN-based carbon nanofibers non-woven
A Facile Route to Construct SiCO Nanospheres with Tunable Sizes
Flexible Hydrophobic and Lipophilic Aluminum-Doped Silicon Carbide Fibrous Mats Synthesized by Electrospinning Polyaluminocarbosilane
Mechanical strength characterization for silicon-to-silicon direct bonding
Experimental investigation and thermodynamic calculation of the phase equilibria in the Al-Bi-Sn ternary system
Effects of preparation conditions on hydrophobic silica aerogels via ambient pressure drying
Design and fabrication of an improved MEMS-based piezoresistive pressure sensor
Low temperature wafer direct bonding using wet chemical treatment
Piezoresistive pressure sensors for harsh environments
Synthesis of Polyyttriocarbosilane and its Conversion to Yttrium-Containing Ceramic
Design and simulation of betavoltaic battery using large-grain polysilicon
Fabrication of aluminum-containing silicon carbide fibers from electrospinning
Synthesis of polyvinylsilazane (PVSZ) microspheres and their transformation to ceramic
Flexible and hydrophobic silicon carbide fibrous mats prepared from polycarbosilane
Preparation of flexible, hydrophobic, and oleophilic silica aerogels based on a methyltriethoxysilane precursor
Synthesis of polyvinylsilazane-b-polystyrene ceramic precursor and preparation of ceramic nanoparticles
Liquid polycarbosilane derived Al-containing SiC ceramic precursors - Polyaluminocarbosilane
Steady-state rheological characterizations of polycarbosilane melts
Preparation in situ of TiO2 surface layers on SiO2 fibers by precursor conversion method
Preparation and photoluminescence properties of continuous freestanding sic films by precursor method
Structure and properties of monolithic silica aerogels by methyltrimethoxysilane
Preparation and surface functional modification of magnetic polyvinyl acetate microspheres
Synthesis of SiFeC magnetoceramics from reverse polycarbosilane-based microemulsions
Pyrolysis Behavior of Titanium-Containing Polycarbosilane in Air
A novel route for preparation of transparent and superhydrophobic silica aerogels
SiO2/TiO2 fibers from titanium-modified polycarbosilane
Fabrication and properties of aluminum-containing silicon carbide fibres
Fabrication and photoluminescence properties of continuous freestanding SiC(Al) films
Studies on fabrication of continuous freestanding SiC films from polycarbosilane precursor
Preparation and photoluminescence of continuous freestanding SiC (Al) films from polyaluminocarbosilane precursor
Continuous Si-C-O-Al fiber derived from aluminum-containing polycarbosilane precursor
Preparation of silicon carbide fibers from the blend of solid and liquid polycarbosilanes
Structure characterizations of pyrolyzed products from polydimethylsilane at different temperatures
A Si-Glass based Pressure Sensor with A Single piezoresistive element for Harsh Environment Applications
Fabrication of Silicon Piezoresistive Pressure Sensor Using a reliable wet etching process
Effect of thermal initiator concentrations on the structure and optical band gaps of polyvinylsilazane-derived SiOCN ceramics
Formation of Novel Microstructured SiCNO Films from Block Copolymer Micellar-Templating Approaches
A facile and fast gelation process to prepare highly spherical millimeter-sized silica aerogel beads
Synthesis of silica-titania composite aerogel beads for the removal of Rhodamine B in water
Self-packaging fabrication of silicon-glass-based piezoresistive pressure sensor
Wireless passive polymer-derived SiCN ceramic sensor with integrated resonator/antenna
Silicon-glass-based single piezoresistive pressure sensors for harsh environment applications
Preparation and characterization of hydrophobic SiO2-glass fibers aerogels via ambient pressure drying
A flux-free method for synthesis of Ce3+-doped YAG phosphor for white LEDs
Superhydrophobic and superoleophilic “sponge-like aerogels for oil/water separation
Novel Microstructured SiCNO Films Based on Polyvinylsilazane-Swelled F127 Micelles
Electrospinning preparation and characterization of alumina nanofibers with high aspect ratio
Synthesis of silica aerogel microspheres by a two-step acidbase solgel reaction with emulsification technique
Synthesis and luminescence properties of Y2.94Al5-mGamO12:0.06Ce(3+) (1 <= m <= 2.5) green phosphors for white LEDs
Synthesis and luminescence properties of Ce3+-doped Y3Al3.5Ga1.5O12green phosphor for white LEDs
Three-dimensional placement rules of Cu6Sn5 textures formed on the (111)(Cu) and (001)(Cu) surfaces using electron backscattered diffraction
Hexagonal-Rod Growth Mechanism and Kinetics of the Primary Cu6Sn5Phase in Liquid Sn-Based Solder
SiCNO-GO Composites with the Negative Temperature Coefficient of Resistance for High-Temperature Sensor Applications
A frequency and bandwidth tunable piezoelectric vibration energy harvester using multiple nonlinear techniques
Electromigration-induced growth mode transition of anodic Cu6Sn5grains in Cu|SnAg3.0Cu0.5|Cu lap-type interconnects
Structure and thermal properties of millimeter-scale alumina aerogel beads formed by a modified ball dropping method
GHz surface acoustic wave ultraviolet sensor based on photo-conductive lamellar Molybdenum Disulfide
Preparation of fumed silica compacts for thermal insulation using wet processing method
GHZ SURFACE ACOUSTIC WAVE ULTRAVIOLET SENSOR BASED ON PHOTO-CONDUCTIVE LAMELLAR MOLYBDENUM DISULFIDE
Mechanical and thermal conductive properties of fiber-reinforced silica-alumina aerogels
Electrical conductivity of silicon carbonitride-reduced graphene oxide composites
Preparation of multi-layer nylon-6 nanofibrous membranes by electrospinning and hot pressing methods for dye filtration
Fast room-temperature sintering of Ag nanoparticles on polyethylene terephthalate film
Research on Evolution Behaviors of SnPb Solder under High Current Stressing
Preparation and Characterization of Silicon Carbide Micro/Nano Fibrous Mat Reinforced Silica Aerogel Composites
Passive wired SiCN temperature sensor for harsh environment applications
The formation of ultrafine polyamide 6 nanofiber membranes with needleless electrospinning for air filtration
Fabrication of high gas-tightness SiCN ceramic via PIP process for increasing sensing distance of pressure sensor
Preparation of paraffin/SiO2 aerogel stable-stabilized phase change composites for high-humidity environment
Preparation and characterization of Al2O3 bulk aerogel with high specific surface area and low density
PDC-SiAlCN ceramic based wireless passive temperature sensors using integrated resonator/antenna up to 1100 degrees C
Electrospun SiO2 aerogel/polyacrylonitrile composited nanofibers with enhanced adsorption performance of volatile organic compounds
Fabrication of high-fracture-strength and gas-tightness PDC films via PIP process for pressure sensor application
Performance of PDC-SiBCN ceramic based wireless passive temperature sensor
Microstructural evolution and mechanical investigation of hot stretched graphene oxide reinforced polyacrylonitrile nanofiber yarns
A large-pressure-range, large-sensing-distance wireless passive pressure sensor based on polymer infiltration pyrolysis-enhanced polymer-derived ceramic films
Preparation and Characterization of SiO2 Aerogel with Controllable Microstructure
Eliminate of colour center and growth of large-size Tb3Ga5O12 crystals
Effect of the graphitization level of the free carbon on the temperature sensitivity of silicon carbonitride-based pressure sensors
Conductivity of SiCNO-BN composite ceramics and their application in wireless passive temperature sensor
<p>Eliminate of cracking for the growth of large-size Tb3Sc2Al3O12 crystals</p>
Simulation and Verification of the Method of Increasing the Wireless Detection Distance of Resonant Cavity Temperature Sensor by Integrated Patch Antenna
Low-Temperature Selective Catalytic Reduction of NOx on MnO2 Octahedral Molecular Sieves (OMS-2) Doped with Co
Silica ceramic nanofiber membrane with ultra-softness and high temperature insulation
Preparation and properties of low-density and high-temperature resistant yttrium doped silica aerogels
Dielectric and electromagnetic properties of amorphous PDCs-Si(Al)CNO with different Al contents in X-band
Preparation and performance analysis of low-temperature SiO2 aerogel-based phase change composites
Simulation analysis of deformation behavior and resilience of Ni-based alloy canted coil spring for dynamic seal
Superhydrophobic, heat-resistant alumina-methylsilsesquioxane hybrid aerogels with enhanced thermal insulating performance in high humidity
Preparation of mesoporous La2Zr2O7 aerogel via non-alkoxide sol-gel process with different solvent systems
Liquid silicone rubber with uniformly dispersed nanosized silica for the preparation of SiOC ceramics
Molecular Aggregation Strategy for Pore Generation in SiOC Ceramics Induced by the Conjugation Force of Phenyl
Effect of BN content on the structural, mechanical, and dielectric properties of PDCs-SiCN(BN) composite ceramics
Study on the Solid and Solution Properties of Sc<SUP>3+</SUP> and Al<SUP>3+</SUP> in (Tb, Sc)<sub>3</sub> (Sc, Al)<sub>5</sub>O<sub>12</sub> Crystals Grown by the Czochralski Method
Phenyl-modified silica aerogels with high-temperature hydrophobicity for self-cleaning and thermal insulation under extreme circumstances
Preparation of SiO2/Fe2O3 composite aerogels for thermal insulation enhancement
Preparation of La2Zr2O7 composite SiO2 aerogels and their fiber-reinforced materials for thermal insulation applications
Preparation and mechanical properties of ZrO2-reinforced polymer-derived SiCNO composite ceramics
Erosion resistance of Y2O3 ceramics in CF4 etching plasma: Microstructural evolution and mechanical properties
Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C
含钇聚碳硅烷制备碳化硅纤维(英文)
Transactions of Nonferrous Metals Society of China,1003-6326,2012.聚乙烯基硅氮烷微球的合成及陶瓷化
高分子材料科学与工程,1000-7555,2012.适用于恶劣环境的MEMS压阻式压力传感器
光学精密工程,1004-924X,2012.常压干燥制备疏水SiO_2气凝胶的影响因素分析
材料工程,1001-4381,2012.聚丙烯腈基纳米炭纤维无纺布的制备与表征
高分子材料科学与工程,1000-7555,2013-09-15.常压干燥制备疏水性SiO_2-玻璃纤维复合气凝胶及表征
材料工程,1001-4381,2015-08-20.用聚碳硅烷制备柔性疏水型碳化硅纤维毡(英文)
硅酸盐学报,0454-5648,2014-04-25.疏水性有序介孔氧化硅薄膜的制备
化学学报,0567-7351,2011.陶瓷先驱体Polyvinylsilazane-b-Polystyrene的合成及纳米陶瓷颗粒的制备
人工晶体学报,1000-985X,2011.先驱体法制备连续SiC自由薄膜及其发光性能
硅酸盐学报 ,0454-5648 ,2009.聚二甲基硅烷分温度段热裂解产物结构表征
高分子材料科学与工程 ,1000-7555 ,2009.甲基三甲氧基硅烷对块状SiO_2气凝胶性能和结构的影响
硅酸盐学报 ,0454-5648 ,2009.不同温度下聚铝碳硅烷的合成与表征
化学学报 ,0567-7351 ,2009.聚碳硅烷熔体的稳态流变性能
高分子材料科学与工程 ,1000-7555 ,2009.先驱体转化法原位制备TiO_2膜层SiO_2纤维
硅酸盐学报 ,0454-5648 ,2009.空气环境下退火温度对连续SiC自由膜结构与发光特性的影响
材料工程 ,1001-4381 ,2009.磁性聚醋酸乙烯酯微球的制备及表面功能化修饰
硅酸盐学报 ,0454-5648 ,2009.液态聚碳硅烷制备含铝碳化硅陶瓷前驱体——聚铝碳硅烷
硅酸盐学报 ,0454-5648 ,2009.聚碳硅烷先驱体法制备连续SiC自由膜研究
功能材料,1001-9731,2008-09-20.连续含铝SiC自由膜的制备与发光特性研究
功能材料,1001-9731,2008-11-20.不同微结构SiCNO陶瓷的制备及介电特性研究
功能材料,1001-9731,2016-11-30.高球形度、高比表面积SiO_2/TiO_2气凝胶小球的制备和表征
材料工程,1001-4381,2017-02-20.PDC-SiCN陶瓷基无线无源温度传感器的制备
功能材料,1001-9731,2017.从掺钕钇铝石榴石晶体中回收稀土
中国稀土学报,1000-4343,2017.有线无源PDC-SiCN陶瓷基温度传感器的设计与制备
功能材料,1001-9731,2017.高球形度、高比表面积SiO/TiO气凝胶小球的制备和表征
材料工程,1001-4381,2017.SiC微/纳米纤维毡增强SiO2气凝胶复合材料的制备和表征
材料工程,1001-4381,2018.石墨烯改性PDC-SiCNO陶瓷的制备及其介电性能
材料工程,1001-4381,2019-03-06.高比表面积、低密度块状Al2O3气凝胶的制备及表征
材料工程,1001-4381,2019-12-24.微观结构可控的SiO2气凝胶的制备与表征
核动力工程,0258-0926,2020-08-20.PDC-SiBCN陶瓷基无线无源温度传感器的性能
材料工程,1001-4381,2020-01-09.动密封用Ni基合金斜圈弹簧的变形行为及回弹力模拟分析
航空学报,1000-6893,2021-07-12.低温SiO2气凝胶基复合相变材料的制备与性能分析
材料工程,1001-4381,2022-08-12.超疏水、超亲油MTES-DMDES型柔性气凝胶的制备及表征
高分子材料科学与工程,1000-7555,2016-12-21.不同前驱体对聚丙烯酰胺凝胶法制备氧化钇稳定氧化锆纳米粉体的影响
中国稀土学报,1000-4343,2023-09-04.ZrO2增强聚合物先驱体SiCNO复合陶瓷的制备和力学性能
材料工程,1001-4381,2024-03-18.气凝胶隔热层隔热性能计算与试验验证
风机技术,1006-8155,2022-08-26.水基钕铁硼磁废料油泥清洗剂配方的研制
化学工程与装备,1003-0735,2015-01-15.